Dell Networking Design D-NWG-DS-00 PDF Questions

Text Material Preview

1 / 4
DELL D-NWG-DS-00 Exam
Dell Networking Design
https://www.passquestion.com/d-nwg-ds-00.html
35% OFF on All, Including D-NWG-DS-00 Questions and Answers
Pass D-NWG-DS-00 Examwith PassQuestion D-NWG-DS-00
questions and answers in the first attempt.
https://www.passquestion.com/
https://www.passquestion.com/
2 / 4
1.Which of the following should be considered during the planning phase of a Cyber Recovery Vault?
A. Physical distance between production and recovery sites
B. The use of thin provisioning
C. Network switch redundancy
D. VLAN segmentation
Answer: A
2.Which of the following is a key element of Post-Deployment Verification?
A. Configuring VLANs
B. Verifying that the network's performance matches the design specifications
C. Assigning IP addresses
D. Installing network cables
Answer: B
3.What is the main function of CloudIQ in the planning and management of Dell PowerSwitch devices?
A. Provides cloud-based storage for network configurations
B. Enables predictive analytics and performance monitoring
C. Manages firewall rules and security policies
D. Provides licensing for PowerSwitch devices
Answer: B
4.Match the following roles in networking design with their corresponding responsibilities:
Role
Network Architect
Network Administrator
Security Engineer
Systems Engineer
Responsibility
A) Designs the entire network structure
B) Manages day-to-day network operations
C) Implements firewalls and intrusion detection
D) Manages servers and network services
A. Network Architect - A Network Administrator - B Security Engineer - C Systems Engineer - D
B. Network Architect - C Network Administrator - D Security Engineer - A Systems Engineer - B
C. Network Architect - D Network Administrator - B Security Engineer - C Systems Engineer - A
D. Network Architect - A Network Administrator - B Security Engineer - D Systems Engineer - C
Answer: A
5.Which of the following steps should be taken when modifying a network design template for a specific
project?
A. Reuse the template from a previous project without changes
B. Customize the template to reflect the unique requirements of the current project
C. Use a generic template without customization
D. Add all devices to a single VLAN
3 / 4
Answer: B
6.What is the primary purpose of using templates in a network design project?
A. To automate network configuration
B. To standardize documentation and ensure consistency
C. To generate real-time network traffic reports
D. To assign IP addresses dynamically
Answer: B
7.What are three design best practices when discussing the potential for a network replacement?
A. Remove and decommission the hardware.
B. Recommend the one-size-fits-all solutions in the Dell Portfolio.
C. Document the replacement steps.
D. Provide support for onsite replacement.
E. Review existing network configurations for Dell, Cisco, and HP switches.
Answer: C, D, E
8.A customer is looking for 25 GbE connectivity to meet the heavy server and storage demands in their
virtualized environment.
What port type provides this connectivity?
A. RJ45
B. SFP28
C. SFP+
D. QSFP+
Answer: B
9.A network was designed, and the products were shipped to the customer.
What must a Design Architect be familiar with to properly document the network design?
A. Financial budgets and constraints
B. Tools and templates
C. Access to Customer Support
Answer: B
10.What is a standard deployment method for an L3 network?
A. BGP neighborship
B. Device link detection protocol
C. Unidirectional link detection
D. Link aggregation control protocol
Answer: A
11.What type of information is typically included in a Pre-Deployment Configuration Template?
A. Device firmware versions
B. IP addressing, device configurations, and security policies
C. Network topology design
4 / 4
D. Network traffic patterns
Answer: B
12.Under which use case is an Enterprise SONiC implementation recommended?
A. Implementation that requires traditional SNMP monitoring
B. Small-to-medium business implementation
C. Cloud-level hyperscale implementation
D. Multipurpose OS implementation
Answer: C
13.Match the following common deployment support tasks with the issues they address:
Task
Verifying cable connections
Checking IP address assignments
Running diagnostics with Solve Online
Reassigning VLANs
Issue
A) Resolves physical connectivity problems
B) Resolves IP conflicts
C) Identifies hardware or software malfunctions
D) Resolves segmentation issues
A. Verifying cable connections - A Checking IP address assignments - B Running diagnostics with Solve
Online - C Reassigning VLANs - D
B. Verifying cable connections - D Checking IP address assignments - B Running diagnostics with Solve
Online - C Reassigning VLANs - A
C. Verifying cable connections - A Checking IP address assignments - B Running diagnostics with Solve
Online - D Reassigning VLANs - C
D. Verifying cable connections - B Checking IP address assignments - A Running diagnostics with Solve
Online - C Reassigning VLANs - D
Answer: A
14.What are two requirements when configuring DCB iSCSI?
A. DCB iSCSI must be configured for all Dell storage arrays connecting to Dell OS10 switch.
B. DCB iSCSI VLAN must be configured as untagged.
C. The Design Architect should work with the Storage Architect to verify compatibility with the planned
storage arrays.
D. iSCSI HBA NPAR must be configuration while configuring DCB iSCSI.
E. Switches must be configured for treating dot1p priority 4 as lossless.
Answer: C, E
	DELL D-NWG-DS-00 Exam
	 Dell Networking Design 
	https://www.passquestion.com/d-nwg-ds-00.html 
	Pass D-NWG-DS-00 Exam with PassQuestion D-NWG-DS-0
	https