Dell PowerSwitch Data Center Deploy D-PDC-DY-23 Real Dumps

Text Material Preview

D-PDC-DY-23 
Dumps Questions
https://www.certspots.com/exam/d-pdc-dy-23/
DELL EMC D-PDC-DY-23 Dumps Questions
1. In a VRRP configured environment without VLT, how does the 
backup VRRP peer respond to ARP requests?
A. Sends an ICMP redirect message
B. Responds to ARP requests with the MAC address of the master 
peer's IP
C. Does not respond to ARP requests
D. Responds to ARP requests with the MAC address of the virtual IP 
address
Answer: C
DELL EMC D-PDC-DY-23 Dumps Questions
2. What benefit does VRRP version 3 provide over VRRP version 2 in 
OS10?
A. Provides preemption capability.
B. Provides MD5 authentication.
C. Allows subsecond timers.
D. Allows multiple masters in the topology.
Answer: C
DELL EMC D-PDC-DY-23 Dumps Questions
3. An administrator is implementing VLT in OS10.
What type of port-channel must they configure for the VLTi?
A. Administrator needs to configure a LACP Port-Channel.
B. Trunking and one (1) native VLAN need to be defined on the port-
channel.
C. None, a port-channel is created automatically during VLT 
discovery.
D. Administrator needs to configure a static Port-Channel.
Answer: C
DELL EMC D-PDC-DY-23 Dumps Questions
4. How are downstream ports disabled in OS10 when UFD is 
configured and an upstream failure is detected?
A. Ports are disabled based on mac address
B. In order starting with highest port number
C. All ports are disabled at the same time
D. In order starting with lowest port number
Answer: D
DELL EMC D-PDC-DY-23 Dumps Questions
5. Which router types are contained in a single-area OSPF 
implementation?
A. Stub router and ABR
B. ABR and ASBR
C. Internal router and ASBR
D. Backbone router and Internal router
Answer: D
DELL EMC D-PDC-DY-23 Dumps Questions
6. How are BGP neighbor relationships created?
A. Dynamically discovered when BGP is enabled on a specific 
interface
B. Statically assigned using BGP MED (Multi-Exit Discriminator)
C. Dynamically discovered using BGP Origin Code
D. Statically assigned using the IP address of the BGP neighbor
Answer: D
DELL EMC D-PDC-DY-23 Dumps Questions
7. On what does PBR base routing decisions?
A. Dijkstra Algorithm
B. Batch traffic
C. Administrator-defined forwarding
D. Shortest path
Answer: C
DELL EMC D-PDC-DY-23 Dumps Questions
8. Two Dell Networking OS10 switches are connected with a port 
channel that spans multiple ports.
What is a supported physical port configuration for this connection?
A. Copper and optic ports can only be mixed with the same speed
B. Optic ports can only be mixed with copper ports when faster due 
to higher latencies
C. Optic and copper ports cannot be mixed in the same LAG
D. Copper ports can only be mixed with optic ports when faster due 
to higher latencies
Answer: A
DELL EMC D-PDC-DY-23 Dumps Questions
9. Multicast flood restrict is a feature enabled by default on OS10 
switches to ensure that no traffic drop occurs.
What is a recommended configuration step for its implementation?
A. Configure the interface between the PIM routers as a dynamic 
multicast router port
B. Enable IGMP snooping on the VLAN interfaces between two PIM 
routers with no IGMP receivers
C. Disable IGMP snooping on the VLAN between two PIM routers 
with no IGMP receivers on that VLAN
D. Configure the interface between the PIM routers and the 
rendezvous point as a static multicast router port
Answer: C
DELL EMC D-PDC-DY-23 Dumps Questions
10. Which two options describe the differences between Layer 2 and 
Layer 3 QoS? (Select 2)
A. DSCP priorities are a combination of Class Selector and Drop 
Precedence.
B. CoS priorities are encoded in the IP header.
C. 802.1P trust-maps only trigger against 802.1Q tagged traffic.
D. DSCP implements seven unique traffic classes for packet queueing.
Answer: AD