M100 23 MTII4200 -Transmitter

Prévia do material em texto

JERGUSON® GAGE AND VALVE
A Division of The Clark • Reliance® Corporation
16633 Foltz Industrial Parkway • Strongsville, OH 44149 USA
Telephone: (440) 572-1500 • Fax: (440) 238-8828
®
A Division Of The Clark-Reliance Corporation
Specialists in Liquid Level Indication
Liquid Level Gages and Valves for the Power and Process Industries
MAX. ACTIVE SENSING LENGTH5.00 DEAD ZONE REF.
15
5
4
9
106
1
2
3
78
16
18
17
15 PLUG, 3/4" (316SS)1P2039-T1
14
BILL OF MATERIAL
END CAP (304SS)
TAG (NOT SHOWN)
SENSING ELEMENT
RANGE MARKER
1
1
1
4
3.50"
1
2
1
SEE NOTE 4
1 ELECTRONICS HOUSING (ALUMINUM)
BOTTOM MOUNTING BRACKET (NOT SHOWN)
ELECTRONICS MODULE (WITH HART)
PICK UP BOARD
CANVAS PHENOLIC TUBING
SCREW, #4-40UNC x 3/8" (POLYCARBONATE)
3/4" POLYOLEFIN SHRINK TUBING
PIPE, 1/4" SCH.40 (304SS)
BUSHING, SENSOR (304LSS)
2
3
4
6
7
5
8
10
11
9
12
13
1
NOTES:
V19961-E1
1. HOUSING COVER INCLUDED BUT NOT SHOWN.
X174761
S22945-R
V19963
V18827-1
V19509-
S22593- -
V19588
X175566
V19962HP
V19962
3. THREAD HOUSING COVER AND PLUG INTO HOUSING UNTIL TIGHT.
FM EXPLOSION-PROOF REQUIREMENTS STATE THAT THERE IS TO BE
A MINIMUM OF 5 THREADS OF ENGAGEMENT.
2. TAG V19963 IS TO BE PERMANENTLY ATTACHED TO HOUSING COVER
USING DRIVE SCREWS (P/N: P1654-P).
STANDOFF MxF 4-40 THREAD x 1" LONG4X17556716
X175568 4 WASHER, #4 NYLON
TOP MOUNTING BRACKET (NOT SHOWN)V20119-R
SCREW, 10-24 X 1/2" (NOT SHOWN)X172934
17
TO LENGTH
TO LENGTH
TO LENGTH
4. PHENOLIC TUBING SHOULD BE CUT 1/2" LONGER THAN PIPE WHEN
PLACED INSIDE OF IT.
STANDOFF, SNAP-ONV2007118 1
MTS
R
TO
REM
O
VE
ELECTRO
LO
O
P 
1
+ -
Section:
Bulletin:
Date:
Supercedes:
M100
M100.23
12/03
1/99
Model MTII 4200
Magnetostrictive Transmitter
• Two wire. 4-20 mA loop powered,
proportional transmitter.
• Sensing lengths from 6 inches to 20 feet
(15cm to 6 meters)
• Continuous level measurement with
repeatability to .01% F.S.
• HART protocol communications standard.
• Modular sensor and electronics design
allows for easy installation on all Magnicator
II gage styles.
• FM approved for use in hazardous locations.
Class I Division 1 Groups B,C, & D
Class II Division 2 Groups E,F, & G
• CSA and CENELEC approvals optional.
• Electronics housed in NEMA 4X, NEMA 7 and
IP 66 enclosure.
• Easily mounts to the Magnicator II without
removing vessel from service.
• Easy zero and span adjustments.
• Ambient operating temperature range from
-30º F to 300ºF (-34º C to 149º C).
• No transmitter parts in contact with fluid
when used in conjunction with the
Magnicator II liquid level gage.
• Local and remote LCD display available.
MODEL MTII 4200 LEVEL TRANSMITTER
PART NUMBER DESIGNATION
WITH FACTORY MUTUAL APPROVAL
A25989 - _ _ _
WITH CENELEC APPROVAL
A26428 - _ _ _
WITH CSA APPROVAL
A26662 - _ _ _
ACTIVE 
SENSING
LENGTH IN
INCHES. 12
THRU 240
INCHES IN 
6 INCH 
INCREMENTS
JERGUSON® GAGE AND VALVE
A Division of The Clark • Reliance® Corporation
16633 Foltz Industrial Parkway • Strongsville, OH 44149 USA
Telephone: (440) 572-1500 • Fax: (440) 238-8828
®
A Division Of The Clark-Reliance Corporation
Specialists in Liquid Level Indication
Liquid Level Gages and Valves for the Power and Process Industries
MAX. ACTIVE SENSING LENGTH5.00 DEAD ZONE REF.
15
5
4
9
106
1
2
3
78
16
18
17
15 PLUG, 3/4" (316SS)1P2039-T1
14
BILL OF MATERIAL
END CAP (304SS)
TAG (NOT SHOWN)
SENSING ELEMENT
RANGE MARKER
1
1
1
4
3.50"
1
2
1
SEE NOTE 4
1 ELECTRONICS HOUSING (ALUMINUM)
BOTTOM MOUNTING BRACKET (NOT SHOWN)
ELECTRONICS MODULE (WITH HART)
PICK UP BOARD
CANVAS PHENOLIC TUBING
SCREW, #4-40UNC x 3/8" (POLYCARBONATE)
3/4" POLYOLEFIN SHRINK TUBING
PIPE, 1/4" SCH.40 (304SS)
BUSHING, SENSOR (304LSS)
2
3
4
6
7
5
8
10
11
9
12
13
1
NOTES:
V19961-E1
1. HOUSING COVER INCLUDED BUT NOT SHOWN.
X174761
S22945-R
V19963
V18827-1
V19509-
S22593- -
V19588
X175566
V19962HP
V19962
3. THREAD HOUSING COVER AND PLUG INTO HOUSING UNTIL TIGHT.
FM EXPLOSION-PROOF REQUIREMENTS STATE THAT THERE IS TO BE
A MINIMUM OF 5 THREADS OF ENGAGEMENT.
2. TAG V19963 IS TO BE PERMANENTLY ATTACHED TO HOUSING COVER
USING DRIVE SCREWS (P/N: P1654-P).
STANDOFF MxF 4-40 THREAD x 1" LONG4X17556716
X175568 4 WASHER, #4 NYLON
TOP MOUNTING BRACKET (NOT SHOWN)V20119-R
SCREW, 10-24 X 1/2" (NOT SHOWN)X172934
17
TO LENGTH
TO LENGTH
TO LENGTH
4. PHENOLIC TUBING SHOULD BE CUT 1/2" LONGER THAN PIPE WHEN
PLACED INSIDE OF IT.
STANDOFF, SNAP-ONV2007118 1
MTS
R
TO
REM
O
VE
ELECTRO
LO
O
P 
1
+ -
Section:
Bulletin:
Date:
Supercedes:
M100
M100.23
12/03
1/99
Model MTII 4200
Magnetostrictive Transmitter
• Two wire. 4-20 mA loop powered,
proportional transmitter.
• Sensing lengths from 6 inches to 20 feet
(15cm to 6 meters)
• Continuous level measurement with
repeatability to .01% F.S.
• HART protocol communications standard.
• Modular sensor and electronics design
allows for easy installation on all Magnicator
II gage styles.
• FM approved for use in hazardous locations.
Class I Division 1 Groups B,C, & D
Class II Division 2 Groups E,F, & G
• CSA and CENELEC approvals optional.
• Electronics housed in NEMA 4X, NEMA 7 and
IP 66 enclosure.
• Easily mounts to the Magnicator II without
removing vessel from service.
• Easy zero and span adjustments.
• Ambient operating temperature range from
-30º F to 300ºF (-34º C to 149º C).
• No transmitter parts in contact with fluid
when used in conjunction with the
Magnicator II liquid level gage.
• Local and remote LCD display available.
MODEL MTII 4200 LEVEL TRANSMITTER
PART NUMBER DESIGNATION
WITH FACTORY MUTUAL APPROVAL
A25989 - _ _ _
WITH CENELEC APPROVAL
A26428 - _ _ _
WITH CSA APPROVAL
A26662 - _ _ _
ACTIVE 
SENSING
LENGTH IN
INCHES. 12
THRU 240
INCHES IN 
6 INCH 
INCREMENTS