CertsOut Cisco-800-150

Text Material Preview

Supporting Cisco
Devices for Field
Technicians (FLDTEC)
Version: Demo
[ Total Questions: 10]
Web: www.certsout.com
Email: support@certsout.com
Cisco
800-150
https://www.certsout.com
https://www.certsout.com/800-150-test.html
IMPORTANT NOTICE
Feedback
We have developed quality product and state-of-art service to ensure our customers interest. If you have any 
suggestions, please feel free to contact us at feedback@certsout.com
Support
If you have any questions about our product, please provide the following items:
exam code
screenshot of the question
login id/email
please contact us at and our technical experts will provide support within 24 hours.support@certsout.com
Copyright
The product of each order has its own encryption code, so you should use it independently. Any unauthorized 
changes will inflict legal punishment. We reserve the right of final explanation for this statement.
Cisco - 800-150Certs Exam
1 of 12Pass with Valid Exam Questions Pool
Category Breakdown
Category Number of Questions
Cisco IOS Software Basics 2
Cisco Equipment and Related Hardware 3
Device Configuration and Verification 4
Maintenance and RMA Procedures 1
TOTAL 10
Question #:1 - [Cisco IOS Software Basics]
Refer to the exhibit. Drag and drop the steps in the TCP/IP encapsulation process from the left onto the 
corresponding layer on the right.
Answer:
Cisco - 800-150Certs Exam
2 of 12Pass with Valid Exam Questions Pool
Explanation
The training describes the as a step-by-step process where data is passed FLDTEC TCP/IP encapsulation
down through the layers of the TCP/IP model:
Cisco - 800-150Certs Exam
3 of 12Pass with Valid Exam Questions Pool
A. 
B. 
C. 
D. 
Application Layer: User data is created (email, file, request) and the application layeradds the application 
, creating a data payload.header
Transport Layer: The data is segmented. Each segment receives a transport-layer header (TCP/UDP), 
enabling proper sequencing and error handling at the destination.
Internet Layer: Segments are encapsulated into (IP datagrams), with an IPheader added to facilitate packets
routing between networks.
Link Layer: Finally, packets are framed with Layer 2 headers and trailers (including theFrame Check 
for error detection), creating a ready to be transmitted on the physical medium.Sequence frame
This layered encapsulation ensures and , which is why it is interoperability troubleshooting clarity
emphasized in .FLDTEC’s IOS Software Basics module
Question #:2 - [Cisco Equipment and Related Hardware]
What must be verified before installing or replacing DIMMs in a Cisco UCS server?
Compatibility of the DIMM with the current firmware version of the server
Current DIMM configuration and population order
Exact type, speed, and capacity of the DIMM
Maximum supported DIMM capacity for the server model
Answer: B
Explanation
Before installing or replacing in a Cisco UCS server, it is essential DIMMs (Dual In-line Memory Modules)
to verify the . Cisco UCS servers have strict current DIMM configuration and the population order
memory population rules to ensure optimal performance and compatibility, particularly in relation to memory 
channels and banks.
While the type, capacity, and firmware compatibility are important, failing to follow the correct population 
guidelines can result in failed boot processes or suboptimal performance.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) – Cisco Equipment and Related 
Hardware
===========
Question #:3 - [Device Configuration and Verification]
Drag and drop the network connectivity and management tools used to ensure connectivity from the left onto 
the description on the right.
Cisco - 800-150Certs Exam
4 of 12Pass with Valid Exam Questions Pool
Answer:
Explanation
PING# Sends ICMP echo request packets to verify connectivity
Cisco - 800-150Certs Exam
5 of 12Pass with Valid Exam Questions Pool
Telnet# Allows virtual terminal connections with unencrypted traffic
SSH# Provides secure, encrypted remote access to network devices
IP address configuration# Requires the PC and Cisco device to be in the same subnet for direct 
connection
These tools and their functions are covered under in the FLDTEC “Device Configuration and Verification”
course:
PING:Utilized to test basic networkconnectivity using ICMP echo request/reply messages. It confirms 
whether a device is reachable and measures the round-trip time.
Telnet:A protocol that allows for remote device access but transmits data in plaintext, which makes it 
insecure. It's typically disabled by default on modern Cisco devices due to security concerns.
SSH (Secure Shell):Replaces Telnet as the preferred method for secure CLI access. It encrypts the session, 
protecting sensitive information such as login credentials.
IP Address Configuration:For direct device access via the same local network, both the PC and the Cisco 
device must be in the same subnet. This allows the use of tools like browser-based GUIs or terminal 
emulators when connecting directly.
Question #:4 - [Device Configuration and Verification]
Drag and drop the descriptions from the left onto the corresponding IPv4 addressing modes on the right.
Answer:
Explanation
Cisco - 800-150Certs Exam
6 of 12Pass with Valid Exam Questions Pool
A. 
B. 
C. 
D. 
This content is aligned with , detailed in the FLDTEC course underIPv4 Addressing Fundamentals Device 
:Configuration and Verification
Unicast: A unicast address uniquely identifies a single host on anetwork. This is the most common address 
type used for standard communication between two devices.
Broadcast: Broadcast addresses (e.g., 255.255.255.255 or subnet-specific broadcast) send traffic to all hosts 
in the network segment. Used for ARP requests and DHCP discovery.
Multicast: Used to deliver a packet to a interested in the data, without flooding the network group of hosts
like a broadcast. Multicast uses addresses from the range .224.0.0.0 to 239.255.255.255
Loopback: The loopback address (127.0.0.1) is reserved for local testing, ensuring that the TCP/IP stack is 
working properly without needing to access the network.
Question #:5 - [Cisco IOS Software Basics]
Which command is used to specify the source for the Cisco IOS software image to load during the boot 
process?
boot image
boot system
boot ios
boot source
Answer: B
Explanation
Cisco - 800-150Certs Exam
7 of 12Pass with Valid Exam Questions Pool
A. 
B. 
C. 
D. 
A. 
B. 
The command is used in globalconfiguration mode to specify the source and filename of the Cisco boot system
IOS software image that should be loaded during the device’s boot process. This command ensures that the 
device loads a specific IOS image, whether it's stored locally in flash or fetched from a TFTP server.
Syntax example:
boot system flash:c1900-universalk9-mz.SPA.157-3.M3.bin
boot image,boot ios, andboot sourceare invalid or non-existent in standard Cisco IOS.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) –Cisco IOS Software Basics
===========
Question #:6 - [Device Configuration and Verification]
Which mode must the console terminal of the device be in before a prewritten configuration is pasted to 
transfer the configuration from an old device to a new one?
Interface configuration mode
Global configuration mode
Privileged EXEC mode
User EXEC mode
Answer: B
Explanation
To apply a prewritten configuration to a new Cisco device, the console terminal must be inGlobal 
. This mode allows administrators to enter configuration commands that affect the Configuration Mode
device's overall operation. To access Global Configuration Mode, one must first enter Privileged EXEC Mode 
by typingenable, and then enterconfigure terminal. Once in Global Configuration Mode, theprewritten 
configuration can be pasted, and the device will accept the commands accordingly.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) – DeviceConfiguration and 
Verification
===========
Question #:7 - [Cisco Equipment and Related Hardware]
Which Layer 2 technology extends to access layer devices, allowing individual switch ports to be assigned for 
network and traffic management in an enterprise network?
BGP
VLANs
Cisco - 800-150Certs Exam
8 of 12Pass with Valid Exam Questions Pool
C. 
D. 
OSPF
MPLS
Answer: B
Explanation
In an enterprise network, are the key Layer 2 technology used to Virtual Local Area Networks (VLANs)
logically segment a network into multiple broadcast domains. VLANs allow network administrators to assign 
individual switch ports to specific VLANs, enabling effective network segmentation and traffic management.
This configuration extends to access layer devices, such as switches where end-user devices connect. By 
isolating traffic into VLANs, administrators can improve network performance, enhance security by 
separating sensitive departments (such as finance and HR), and simplify network management.
Unlike routing protocols such as BGP and OSPF, which operate at Layer 3, or MPLS, which is a Layer 2.5 
forwarding technology used primarily in service provider networks, VLANs are explicitly designed for Layer 
2 segmentation within LAN environments.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) – Cisco Equipment and Related 
Hardware
Question #:8 - [Device Configuration and Verification]
Drag and drop the steps from the left into order to capture the status of a Cisco device.
Cisco - 800-150Certs Exam
9 of 12Pass with Valid Exam Questions Pool
Answer:
Cisco - 800-150Certs Exam
10 of 12Pass with Valid Exam Questions Pool
Explanation
This procedure is taught in the under the section and FLDTEC course Device Configuration and Verification
reflects standard field technician workflows:
Connect to the console portusing a console cable and terminal software (like PuTTY or Tera Term).
Access the CLIof the Cisco device by logging in via the console session.
Create a log fileor enable logging in the terminal emulator to begin capturing output.
Check the router statususing commands such as show running-config, show ip interface brief, or 
show version.
Save the output filefrom the terminal emulator for documentation, troubleshooting, or escalation.
This logical flow ensures accurate diagnostics and traceability during field support operations.
Question #:9 - [Maintenance and RMA Procedures]
Cisco - 800-150Certs Exam
11 of 12Pass with Valid Exam Questions Pool
A. 
B. 
C. 
D. 
A. 
B. 
C. 
D. 
What happens to the switch operation when a supervisor module in a Cisco Nexus switch is replaced by two 
supervisor modules?
The switch continues to operate without any interruption.
All modules in the switch are reset due to a stateless switchover.
Only the affected line cards reset.
The switch shuts down completely.
Answer: B
Explanation
In Cisco Nexus switches, when transitioning from a single supervisor module to a dual supervisor 
configuration, the behavior depends on the redundancy mode configured.
Stateful Switchover (SSO):In configurations supporting SSO, the active and standby supervisors 
synchronize their state and configuration, allowing for seamless failover without resetting other 
modules.
Stateless Switchover (Warm Standby):In certain modes, such as the ACI-mode on Cisco Nexus 9508 
switches, the standby supervisor does not maintain synchronized state information with the active 
supervisor. In this scenario, if a switchover occurs (e.g., due to the replacement of the active 
supervisor), all modules in the switch are reset because the switchover is stateless.
Therefore, when a supervisor module is replaced in a configuration that does not support stateful switchover, 
all modules in the switch are reset due to the stateless nature of the switchover.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) – Maintenance and RMA Procedures
===========
Question #:10 - [Cisco Equipment and Related Hardware]
What is a feature of Cisco Meraki switches that simplifies the replacement process?
Built-in configuration wizard
Automatic hardware detection
Offline configuration backup
Cloud-based management
Answer: D
Explanation
Cisco - 800-150Certs Exam
12 of 12Pass with Valid Exam Questions Pool
Cloud-based managementis a core feature of Cisco Merakiswitches and significantly simplifies the device 
replacement process. When a failed switch is replaced:
The new hardware can be claimed in the Meraki dashboard.
The previously assigned configuration is automatically applied to the replacement device.
This eliminates the need for local reconfiguration and ensures continuity with minimal manual effort.
This centralized approach ensures that configurations are stored securely and consistently applied across 
devices.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) – Cisco Equipment and Related 
Hardware
===========
About certsout.com
certsout.com was founded in 2007. We provide latest & high quality IT / Business Certification Training Exam 
Questions, Study Guides, Practice Tests.
We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially 
Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on.
View list of all certification exams: All vendors
 
 
 
We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses 
listed below.
Sales: sales@certsout.com
Feedback: feedback@certsout.com
Support: support@certsout.com
Any problems about IT certification or our products, You can write us back and we will get back to you within 24 
hours.
https://www.certsout.com
https://www.certsout.com/vendors.html
https://www.certsout.com/Apple-Practice-Test.html
https://www.certsout.com/Cisco-Practice-Test.html
https://www.certsout.com/Citrix-Practice-Test.html
https://www.certsout.com/CompTIA-Practice-Test.html
https://www.certsout.com/EMC-Practice-Test.html
https://www.certsout.com/ISC-Practice-Test.html
https://www.certsout.com/IBM-Practice-Test.html
https://www.certsout.com/Juniper-Practice-Test.html
https://www.certsout.com/Microsoft-Practice-Test.html
https://www.certsout.com/Oracle-Practice-Test.html
https://www.certsout.com/Symantec-Practice-Test.html
https://www.certsout.com/VMware-Practice-Test.html
mailto:sales@certsout.com
mailto:feedback@certsout.com
mailto:support@certsout.com