D-NWR-DY-01 Dell NetWorker Deploy Exam Dumps Questions

Text Material Preview

<p>D-NWR-DY-01 Dell NetWorker Deploy Exam exam dumps questions are the best</p><p>material for you to test all the related DELL EMC exam topics. By using the D-</p><p>NWR-DY-01 exam dumps questions and practicing your skills, you can increase</p><p>your confidence and chances of passing the D-NWR-DY-01 exam.</p><p>Features of Dumpsinfo’s products</p><p>Instant Download</p><p>Free Update in 3 Months</p><p>Money back guarantee</p><p>PDF and Software</p><p>24/7 Customer Support</p><p>Besides, Dumpsinfo also provides unlimited access. You can get all</p><p>Dumpsinfo files at lowest price.</p><p>Dell NetWorker Deploy Exam D-NWR-DY-01 exam free dumps questions are</p><p>available below for you to study.</p><p>Full version: D-NWR-DY-01 Exam Dumps Questions</p><p>1.An administrator using EMC Networker Power edition attempts to set server parallelism to 96 when</p><p>adding a remote storage node. When saving the changes to the configuration, they notice that the</p><p>server parallelism reverts back to 64.</p><p>What action needs to be taken to set server parallelism to 96?</p><p>A. Add EMC Networker Storage Node Enabler Code.</p><p>B. Set device max sessions to 96.</p><p>C. Configure group parallelism to 96.</p><p>D. Enable diagnostic mode.</p><p>Answer: A</p><p>2.An administrator is configuring a backup environment and requires the following:</p><p>- Eliminate storage node bottlenecks</p><p>1 / 23</p><p>https://www.dumpsinfo.com/unlimited-access/</p><p>https://www.dumpsinfo.com/exam/d-nwr-dy-01</p><p>- Reduce the number of network hops</p><p>Which Dell EMC NetWorker feature should be used?</p><p>A. Client Direct</p><p>B. Checkpoint Restart</p><p>C. Deduplicated Backup</p><p>D. Parallel Save Streams</p><p>Answer: A</p><p>3.An EMC NetWorker administrator wants to back up Microsoft Exchange server using EMC</p><p>NetWorker Module for Microsoft Applications.</p><p>What needs to be specified in the Backup command field?</p><p>A. nsrsnap_vss_save</p><p>B. nsrxchsv</p><p>C. save</p><p>D. savefs</p><p>Answer: A</p><p>4. All save sets are cloned.</p><p>5.What is a characteristic of EMC NetWorker virtual synthetic full backups?</p><p>A. All participating savesets must be on the same Data Domain system</p><p>B. Participating savesets must use a deduplication node for storage</p><p>C. Backup processing occurs on the storage node, bypassing the client</p><p>D. Deduplication processing occurs on the client, bypassing the storage node</p><p>Answer: A</p><p>6.A Dell EMC NetWorker administrator installed the NetWorker client software on a Microsoft</p><p>Windows server that needs to be backed up.</p><p>The NetWorker device resource is already configured and mounted as “volume ddbackup.001”.</p><p>However, the administrator is still unable to perform a backup of this client.</p><p>What else must be created or modified to run a backup?</p><p>A. Client and group only</p><p>B. Policy, workflow, group, action, and client</p><p>C. Policy, workflow, and action only</p><p>D. Policy, group, pool, and action</p><p>Answer: B</p><p>7.In a Microsoft Windows environment, what is a characteristic of a bare metal recovery when using</p><p>Dell EMC NetWorker?</p><p>A. Can be used to restore individual files</p><p>B. Can be used for recovery of networker server database</p><p>C. Required when a host encounters a catastrophic failure</p><p>D. Restores only the operating system</p><p>Answer: C</p><p>8.In Dell EMC NetWorker, what is a requirement when creating an action for the data movement</p><p>policy with Cloud Tier devices?</p><p>2 / 23</p><p>https://www.dumpsinfo.com/</p><p>A. Data Domain devices and Cloud Tier devices should be in same media pool</p><p>B. NetWorker can configure only one Data Domain Cloud Unit name for the Cloud Tier devices</p><p>C. Both source and destination storage nodes must belong to the same Data Domain MTree</p><p>D. NetWorker staging to Data Domain Cloud Tier devices should not be used</p><p>Answer: C</p><p>9.What is a feature of the CloudBoost appliance?</p><p>A. enables the transfer of backups to cloud storage</p><p>B. replaces the PowerProtect DD series appliance</p><p>C. enables the transfer of backups to Dell EMC Cloud Tier</p><p>D. replaces the PowerProtect DDVE appliance</p><p>Answer: A</p><p>10.A Dell EMC storage administrator has configured a client snapshot backups using Networker</p><p>Snapshot Management. The backup completed successfully and the administrator is now ready to</p><p>restore the data.</p><p>Which type of restore will destroy all existing data on the target application volume?</p><p>A. Snapshot</p><p>B. Rollback</p><p>C. Restore from rollover</p><p>D. Directed</p><p>Answer: B</p><p>11.What is integrated with NMDA to provide snapshot-based protection for DB2?</p><p>A. PowerSnap</p><p>B. SnapImage</p><p>C. VSS</p><p>D. VMware</p><p>Answer: A</p><p>12.What is used by a VMware end-user to restore the image-level protected virtual machine with the</p><p>Data Protection Extension plug-in for Dell EMC NetWorker?</p><p>A. Data Protection Restore Client</p><p>B. NetWorker Management Console</p><p>C. VMware vCenter</p><p>D. vRealize Automation Portal</p><p>Answer: A</p><p>13.What is a characteristic of the Dell EMC NetWorker RAP database?</p><p>A. Database can be modified using Windows Notepad.</p><p>B. Two entries per configured resource exists.</p><p>C. Database is located under /nsr/res/nsrdb.</p><p>D. All update requests are handled by nsrexecd.</p><p>Answer: C</p><p>14.A customer has just upgraded their EMC NetWorker server. The upgrade included a new IP</p><p>3 / 23</p><p>https://www.dumpsinfo.com/</p><p>address and hostname.</p><p>After updating the configuration file on the client, which service should be restarted in order for the</p><p>change to be recognized?</p><p>A. nsrdb</p><p>B. nsrexecd</p><p>C. nsrd</p><p>D. nsrindexd</p><p>Answer: B</p><p>15.A backup administrator is testing a block-based backup of a Linux server that is supported by Dell</p><p>NetWorker, and the backup fails.</p><p>What is the cause of the failure?</p><p>A. LVM configuration is used.</p><p>B. AFTD target device is used.</p><p>C. BBB package is not installed.</p><p>D. Block-based backup is not supported on Linux.</p><p>Answer: C</p><p>16.What is a characteristic of an instant recovery with Dell EMC NetWorker VMware Protection?</p><p>A. Restores an existing virtual machine to a previous state</p><p>B. Recovers individual files and folders back to a different virtual machine</p><p>C. Restores a virtual machine directly from the backup image without data movement</p><p>D. Creates a new virtual machine running directly from the backup image without data movement</p><p>Answer: D</p><p>17.Which NetWorker module must be installed on a NetWorker client running an SAP R/3 on</p><p>Microsoft SQL to ensure it is backed up properly without a need to shut down the application?</p><p>A. NMDA</p><p>B. NMM</p><p>C. NMMEDI</p><p>D. NMSAP</p><p>Answer: B</p><p>18.An EMC Networker administrator notices that clients are being backed up one at a time, even</p><p>though they are scheduled to start simultaneously.</p><p>What may be a cause of this?</p><p>A. Server parallelism is set to 1</p><p>B. There is only one volume labeled</p><p>C. Client parallelism is set to 1</p><p>D. There is only one pool configured</p><p>Answer: A</p><p>19.When performing a server-initiated backup, which EMC NetWorker command is run by the policy</p><p>framework and issues a remote execution request to clients?</p><p>A. nsrpolicy</p><p>B. savegrp</p><p>C. savefs</p><p>4 / 23</p><p>https://www.dumpsinfo.com/</p><p>D. nsradmin</p><p>Answer: B</p><p>20.Which command must be used to create a clone action for the existing workflow?</p><p>A. nsrpolicy</p><p>B. nsrworkflow</p><p>C. nsrrecopy</p><p>D. nsradmin</p><p>Answer: A</p><p>21.What is a characteristic of Dell EMC Networker MEDITECH backups?</p><p>A. Integrates with the Backup Facilitator</p><p>B. Only supports integrated serverless backups</p><p>C. Only supports tape and Data Domain devices</p><p>D. Supports remote replicas without requiring RecoverPoint</p><p>Answer: D</p><p>22.Which policy in EMC NetWorker determines the length of time that records are retained within the</p><p>Client File Index (CFI)?</p><p>A. Browse</p><p>B. Retention</p><p>C. Snapshot</p><p>D. Staging</p><p>Answer: A</p><p>23.How does the EMC NetWorker online backup feature work?</p><p>A. Uses a vendor specific API to extract data</p><p>B. Copies the data to a temporary location before back up</p><p>C. Shuts down the database before backing up the data</p><p>D. Used only in an active/passive environment</p><p>Answer: A</p><p>24.A Dell EMC NetWorker administrator wants to use CloudBoost appliances to protect clients both</p><p>on-premises and in the cloud. The administrator plans to configure CloudBoost site cache. When is it</p><p>recommended to use CloudBoost site cache?</p><p>A. Backup from within the cloud and replication to the cloud only</p><p>B. Backup to the cloud and backup from</p><p>within the cloud only</p><p>C. Backup to the cloud, backup from within the cloud, and replication to the cloud</p><p>D. Backup to the cloud and replication to the cloud only</p><p>Answer: C</p><p>25.In EMC NetWorker, what is a benefit of using multiplexing with backups to tape?</p><p>A. Reduced network traffic</p><p>B. Improved restore times</p><p>C. Reduced CPU utilization on backup client</p><p>D. Improved backup device throughput</p><p>5 / 23</p><p>https://www.dumpsinfo.com/</p><p>Answer: D</p><p>26.Which directory holds the tracking information of each file backed up by the client "tuba" on EMC</p><p>NetWorker server "soprano"?</p><p>A. /nsr/index/tuba/db6</p><p>B. /nsr/tuba/db6</p><p>C. /nsr/index/soprano/db6</p><p>D. /nsr/soprano/db6</p><p>Answer: A</p><p>27.An EMC NetWorker administrator has two LTO-4 tape drives configured on an EMC NetWorker</p><p>server. One of the two tape drives is dynamically shared with an EMC NetWorker storage node.</p><p>The other tape drive is statically assigned to the EMC NetWorker server. The shared drive stops</p><p>functioning on the EMC NetWorker server but continues to function on the storage node.</p><p>How many nsrmmd are now running on the storage node?</p><p>A. 1</p><p>B. 2</p><p>C. 3</p><p>D. 4</p><p>Answer: A</p><p>28.After adding a few clients over a number of weeks, the backups have been queuing up and going</p><p>past the backup window. The administrator has been asked to review and adjust NetWorker</p><p>configuration to allow enough sessions, so the backups complete on time without going into the</p><p>queue. Clone window is not a concern at this time.</p><p>They checked the configuration and have determined the following.</p><p>Server Parallelism = 80</p><p>Number of devices = 9</p><p>Backup devices = 6</p><p>Clone devices = 3</p><p>Target session on each device = 4</p><p>Max session on each device = 8</p><p>There is a total of 21 clients, each with a client parallelism = 4 After doing the calculations, what</p><p>needs to be done?</p><p>A. Increase the server parallelism to 84 and device max session on each backup device to 14</p><p>B. Increase max session for each backup device to 14</p><p>C. Increase the target session for each backup device to 14</p><p>D. Increase the server parallelism to 84 and device target session on each backup device to 14</p><p>Answer: A</p><p>29.What is a characteristic of an EMC NetWorker advanced file type device?</p><p>A. Duplicate media database records</p><p>B. Only clones to another advanced file type device</p><p>C. Requires CIFS or NFS shares</p><p>D. Requires a separate pool</p><p>Answer: A</p><p>6 / 23</p><p>https://www.dumpsinfo.com/</p><p>30.Refer to the exhibit.</p><p>An EMC NetWorker customer has two data zones, A and B, with autochanger AC1 and AC2,</p><p>respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is</p><p>configured as a shared autochanger. Two drives of AC2 are statically assigned.</p><p>How many drives of AC2 can be shared in Zone A?</p><p>A. 2</p><p>B. 4</p><p>C. 0</p><p>D. 6</p><p>Answer: C</p><p>31.An Administrator has deployed the EMC NetWorker server software with clustering. There are 50</p><p>clients and an autochanger with 4 drives controlled by a remote storage node.</p><p>What is the path of the backup data from the client to the media?</p><p>A. Client C> Storage Node C> Media</p><p>B. Client C> Media</p><p>C. Client C> Cluster Server C> Media</p><p>D. Client C> Cluster Server C> Storage Node C> Media</p><p>Answer: A</p><p>32.Which applications are supported by the Dell EMC NetWorker Module for Microsoft (NMM)</p><p>federated backup?</p><p>A. SharePoint and MySQL</p><p>B. SQL VDI and SQL VSS</p><p>C. Exchange and SQL VSS</p><p>D. Exchange and SQL VDI</p><p>Answer: C</p><p>33.A Dell EMC NetWorker backup administrator is configuring a new backup workflow. In addition to</p><p>Backup Traditional, what are supported action types for traditional backup workflows?</p><p>A. Expire, Check Connectivity, and Probe</p><p>7 / 23</p><p>https://www.dumpsinfo.com/</p><p>B. Probe, Check Connectivity, and Clone</p><p>C. Probe, Generate Index, and Clone</p><p>D. Expire, Check Connectivity, and Clone</p><p>Answer: B</p><p>34.A backup administrator is performing a non-client direct backup. On which must the deduplication</p><p>processing be completed?</p><p>A. Networker Management Console Server</p><p>B. Networker Client</p><p>C. Networker Storage node</p><p>D. Data Domain</p><p>Answer: C</p><p>35.Where is the Dell EMC Data Protection Extension plug-in installed?</p><p>A. ESXi Host</p><p>B. vRO Host</p><p>C. vProxy Appliance</p><p>D. vCenter Host</p><p>Answer: B</p><p>36.When Dell EMC NetWorker is integrated with a Data Domain system with DD Boost, what</p><p>analyzes the data stored on the Data Domain and sends only the unique data for storage?</p><p>A. Storage Node Process</p><p>B. Dynamic Parallel Save Streams</p><p>C. Distributed Segment Processing</p><p>D. Deduplication Node</p><p>Answer: D</p><p>37.When connecting to an EMC NetWorker console server from a different host, an error message</p><p>indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that</p><p>the supported JRE version is already installed on the EMC NetWorker console server. However, the</p><p>error message remains.</p><p>What needs to be done to resolve the problem?</p><p>A. Install the supported version of JRE on the NMC client</p><p>B. Reinstall the EMC NetWorker Management Console server.</p><p>C. Reinstall the existing JRE version.</p><p>D. Restart the console server.</p><p>Answer: A</p><p>38.A Dell EMC NetWorker administrator is considering using either a CloudBoost or a Data Domain</p><p>Cloud Tier solution.</p><p>What is a function of only CloudBoost?</p><p>A. Uses an external storage node</p><p>B. Deduplication and encryption</p><p>C. Direct backups to the cloud provider</p><p>D. Compression and encryption</p><p>Answer: C</p><p>8 / 23</p><p>https://www.dumpsinfo.com/</p><p>39.What method is used by Clone Controlled Replication to create identical copies of save sets on</p><p>two devices?</p><p>A. Virtual Synthetic Full</p><p>B. Parallel Save Stream</p><p>C. Recover Pipe to Save</p><p>D. Block Based Backup</p><p>Answer: C</p><p>40.What application does the Enhanced Server Recovery option in EMC NetWorker allow us to</p><p>interact with?</p><p>A. Home Base</p><p>B. Avamar</p><p>C. EMC NetWorker module for Microsoft applications</p><p>D. Data Protection Advisor</p><p>Answer: A</p><p>41.Which combination of simultaneous backups and recoveries is supported when using an advanced</p><p>file type device in EMC NetWorker?</p><p>A. Multiple backups and multiple recoveries</p><p>B. Multiple backups and only one recovery</p><p>C. Only one backup and multiple recoveries</p><p>D. Only one backup and one recovery</p><p>Answer: A</p><p>42.On what type of device is a virtual synthetic full backup performed?</p><p>A. Multiple PowerProtect DD using DD Boost</p><p>B. Cloud Tier using PowerProtect DD</p><p>C. ProtectPoint device on PowerProtect DD</p><p>D. Single PowerProtect DD using DD Boost</p><p>Answer: D</p><p>43.What is the default port number for the Dell EMC NetWorker server to authenticate the NMC</p><p>server host?</p><p>A. 7937</p><p>B. 7938</p><p>C. 9000</p><p>D. 9090</p><p>Answer: D</p><p>44.In EMC NetWorker, what is a characteristic of a probe-based group backup?</p><p>A. Name of the probe script must begin with "nsr" or "save"</p><p>B. Probe script must reside on a user-defined directory</p><p>C. A group does not allow multiple probes to be run</p><p>D. Probe processing occurs throughout the day</p><p>Answer: A</p><p>9 / 23</p><p>https://www.dumpsinfo.com/</p><p>45.What is the outcome of using the recover -iN command?</p><p>A. The recovered file is renamed when a conflict occurs.</p><p>B. A recover is simulated, and no data is recovered.</p><p>C. The file is not recovered if a conflict occurs.</p><p>D. The file overwrites the existing file if it is newer than the existing file.</p><p>Answer: A</p><p>46.A customer’s EMC NetWorker environment has a Solaris client that had been backing up without</p><p>failing for several weeks.</p><p>The client has the following local mount points:</p><p>/</p><p>/usr</p><p>/home</p><p>/var</p><p>And two nfs mount points:</p><p>/mars/data1</p><p>/jupiter/data1</p><p>The save set was identified as "ALL" in the client resource. The client had crashed and was</p><p>successfully rebooted the previous day. The first request for a restore for this client was submitted for</p><p>the last night's backup of /mars/data1/Monthly.doc and /jupiter/data1/Weekly.xls. The jupiter restore is</p><p>successful but the mars data is not found and fails to be restored.</p><p>What is the most likely cause of this restore failure?</p><p>A. /mars/data1 was not in the /etc/vfstab file and had not been backed up.</p><p>B. The /nsr/res/servers file on mars is empty, prohibiting the restore.</p><p>C.</p><p>The nsrexecd was not running on mars, preventing the backup.</p><p>D. The client save set was identified as ALL. ALL does not back up nfs mounts points.</p><p>Answer: A</p><p>47. Thaw application</p><p>Answer: A</p><p>48.What is a requirement when configuring Dell EMC NetWorker staging with a Data Domain Cloud</p><p>Tier device?</p><p>A. Staging to a Data Domain Cloud Tier device is supported based on the water marks</p><p>B. Staging to a destination pool with a Data Domain Cloud Tier backup pool is supported</p><p>C. Staging from a Cloud Tier device to two available Data Domain systems is supported</p><p>D. Staging from a Data Domain Cloud Tier device when using only one Cloud Unit is supported</p><p>Answer: A</p><p>49.A customer is using NVE to back up their environment. The administrator wants to upgrade it to a</p><p>newer version.</p><p>Which package is needed to accomplish this task?</p><p>A. NveUpgrade-VERSION.tgz</p><p>B. NveUpgrade-VERSION.rpm</p><p>C. NveUpgrade-VERSION.pkg</p><p>D. NveUpgrade-VERSION.avp</p><p>10 / 23</p><p>https://www.dumpsinfo.com/</p><p>Answer: D</p><p>50.What is an advantage of integrating Dell EMC NetWorker Snapshot Management with</p><p>ProtectPoint?</p><p>A. Minimal backup load on the application host and storage node</p><p>B. Backup of production data stored on third-party storage</p><p>C. Faster cloning process for disk devices</p><p>D. Minimal backup load on the NetWorker server</p><p>Answer: C</p><p>51.What command is used to purge client file index entries for save sets that have passed their</p><p>retention date?</p><p>A. nsrmm -d</p><p>B. nsrim -X</p><p>C. nsrck -L7</p><p>D. nsrck -L4</p><p>Answer: B</p><p>52.What is the default TCP/IP port used by EMC NetWorker Management Console database</p><p>process?</p><p>A. 2638</p><p>B. 9000</p><p>C. 7937</p><p>D. 9001</p><p>Answer: A</p><p>53.A Dell EMC NetWorker administrator configured their backups for save set "C:Users" to run daily</p><p>at 12:00 PM with levels based on the exhibit.</p><p>11 / 23</p><p>https://www.dumpsinfo.com/</p><p>At 1:00 AM on Day 3, file "C:UsersJohnmyscript.txt" was deleted. At 5:00 PM on Day 4, folder</p><p>"C:UsersJohn" was renamed to "C:UserJohn_old".</p><p>On Day 7, the administrator decided to recover the entire save set back to Day 6. Based on this</p><p>environment, which result can be expected?</p><p>A. myscript.txt file will not be recovered under "C:UsersJohn"</p><p>B. myscript.txt file will be recovered under "C:UserJohn_old"</p><p>C. myscript.txt file will not be recovered under "C:UserJohn_old"</p><p>D. myscript.txt file will be recovered under "C:UsersJohn"</p><p>Answer: D</p><p>54.A Dell EMC Networker backup is configured as a probe-based backup.</p><p>What must be configured in the workflow for this backup?</p><p>Probe and backup actions</p><p>Backup and clone actions</p><p>Probe action only</p><p>Check Connectivity and probe actions</p><p>Answer: A</p><p>55.A Dell EMC NetWorker environment has a cluster consisting of two physical nodes and one virtual</p><p>service.</p><p>What is the minimum number of NetWorker client resources that must be created to ensure all of the</p><p>12 / 23</p><p>https://www.dumpsinfo.com/</p><p>data will be backed up?</p><p>A. 1</p><p>B. 2</p><p>C. 3</p><p>D. 4</p><p>Answer: C</p><p>56.In Dell EMC NetWorker, what is a characteristic of a probe-based backup?</p><p>A. Name of the probe script must begin with "probe"</p><p>B. A group does not allow multiple probes to be run</p><p>C. Probe processing occurs when the probe action starts</p><p>D. Probe script must reside in a user-defined directory</p><p>Answer: C</p><p>57.Before configuring VM image backups, NetWorker vProxy must be deployed. Where can the IT</p><p>administrator download the Open Virtual Appliance (OVA) template from?</p><p>A. Networker support download page</p><p>B. Directly from Netwotker server</p><p>C. From PowerProtect DD share</p><p>D. From VMware support site</p><p>Answer: A</p><p>58.What are categories of Console database data retention?</p><p>A. Completion Data and Backup Failure Data</p><p>B. Audit Data and Completion Data only</p><p>C. Audit Data, Completion Data, and Completion Message</p><p>D. Backup Failure Data and Completion Message</p><p>Answer: C</p><p>59.Which command is used to recover EMC Networker server?</p><p>A. nsrdr</p><p>B. scanner</p><p>C. mmrecov</p><p>D. recover</p><p>Answer: A</p><p>60.What is a consideration when using the Dell EMC NetWorker block based backup feature on</p><p>Microsoft Windows?</p><p>A. An incremental level results in a virtual full backup when using Data Domain</p><p>B. Backup storage must be a deduplication device</p><p>C. Full and incremental backups must be on different devices</p><p>D. No more than 25 incremental backups can be created between full backups</p><p>Answer: A</p><p>61.What are characteristics of the Dell EMC NetWorker Client File Index (CFI) and the media</p><p>database?</p><p>13 / 23</p><p>https://www.dumpsinfo.com/</p><p>A. One CFI per physical NetWorker client</p><p>Only one media database for the datazone</p><p>B. CFI is stored on the client</p><p>Media database is stored on the NetWorker server</p><p>C. One CFI for the datazone</p><p>One media database per physical NetWorker client</p><p>D. CFI is stored on the NetWorker server</p><p>Media database is stored on the client</p><p>Answer: A</p><p>62.In a Dell EMC NetWorker environment, what must be installed on a new storage node to offload</p><p>storage node activities from the CloudBoost appliance?</p><p>A. NetWorker storage node, client, and extended client software on a Windows host</p><p>B. Only the NetWorker storage node and client on a Linux host</p><p>C. Only the NetWorker storage node and client on a Windows host</p><p>D. NetWorker storage node, client, and extended client software on a Linux host</p><p>Answer: D</p><p>63.Which process needs to be running on each EMC NetWorker client?</p><p>A. nsrd</p><p>B. nsrexecd</p><p>C. nsrjobd</p><p>D. nsrmmd</p><p>Answer: B</p><p>64.An administrator has been asked to assess the options available from the NetWorker backup</p><p>application.</p><p>The objectives are:</p><p>- Greater efficiency with virtualized and pooled resources</p><p>- IT resources can be provisioned on-demand and easily returned to the resource pool</p><p>- Quickly allocate computing resources to meet business demands</p><p>- Enhanced security and protection of information assets</p><p>What should be recommended to the client?</p><p>A. NetWorker Virtual Edition and CloudBoost virtual;</p><p>B. On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention</p><p>C. On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives</p><p>D. Complete Data Protection Suite as Infrastructure-as-a-Service</p><p>Answer: D</p><p>65.A backup administrator uses the EMC Networker Module for Microsoft Applications. The</p><p>administrator wants faster recovery of data directly from snapshots on disk for their Microsoft</p><p>Exchange implementation.</p><p>Which technology is used by NMM to perform backups and recovery?</p><p>A. Volume Shadow Copy Service</p><p>B. NDMP</p><p>C. PowerSnap</p><p>D. Snaplmage</p><p>Answer: A</p><p>14 / 23</p><p>https://www.dumpsinfo.com/</p><p>66.In an EMC NetWorker environment, which two ports will nsrexecd always try to listen on?</p><p>A. 7937, 7938</p><p>B. 9301, 9302</p><p>C. 9000, 9001</p><p>D. 8080, 8081</p><p>Answer: A</p><p>67.An Microsoft Exchange server administrator wants to receive a daily e-mail about the backup</p><p>status of the Exchange server.</p><p>Where in the EMC NetWorker Configuration tab can this notification be set?</p><p>A. Client Properties</p><p>B. Notifications</p><p>C. Security Audit Log</p><p>D. Registrations</p><p>Answer: A</p><p>68.You are logged in to your Windows-based EMC NetWorker server and are attempting to manually</p><p>run a server-initiated backup via the command line. You are receiving an error when attempting the</p><p>savegrp command.</p><p>What is the most likely reason for the error?</p><p>A. You do not have system administrator privileges.</p><p>B. You cannot manually start server-initiated backups.</p><p>C. You should use the save command instead of savegrp.</p><p>D. The savegrp command can be run only from a backup client.</p><p>Answer: A</p><p>69.An EMC NetWorker Administrator wants to perform an online backup of Exchange 2010 that is</p><p>running on a Windows 2008 Operating System.</p><p>Which solution should be used?</p><p>A. Install the EMC NetWorker Module for Databases and Applications on the Exchange 2010 host.</p><p>B. Install the EMC NetWorker Module for Microsoft Applications on the Exchange 2010 host.</p><p>C. Install the EMC NetWorker Client which can utilize the VSS technology of Windows 2008.</p><p>D. Install the EMC NetWorker Client which can utilize the savepnpc feature.</p><p>Answer: B</p><p>70.What is the first step that occurs during a client</p><p>initiated backup?</p><p>A. Save program generates one save stream of data</p><p>B. Save program connects to nsrmmd</p><p>C. Save program initiates a connection to nsrindexd</p><p>D. nsr daemon sends information to EMC NetWorker server</p><p>Answer: A</p><p>71.On an EMC NetWorker Client, which command can be used to backup local data?</p><p>A. save</p><p>B. savepsm</p><p>15 / 23</p><p>https://www.dumpsinfo.com/</p><p>C. nsrsnap_vss_save</p><p>D. nsrndmp_save</p><p>Answer: A</p><p>72.What are the supported recovery types in the NetWorker User for Windows interface?</p><p>A.</p><p>What are the supported recovery types in the NetWorker User for Windows interface?</p><p>B. Browsable, Directed, and Snapshot</p><p>C. Browsable, Save set, and Directed</p><p>D. Snapshot, File-level, and Directed</p><p>Answer: C</p><p>73.In EMC NetWorker, what happens to the volume when Auto Media Management is enabled in</p><p>"Device" properties for standalonedevices?</p><p>A. Manually loaded into the device for backup</p><p>B. Automatically labeled to store backup data</p><p>C. Status is set to "suspect"</p><p>D. Status is set to "recyclable"</p><p>Answer: A</p><p>74.A Dell EMC NetWorker backup administrator wants to recover a large number of files from a</p><p>backup.</p><p>Which type of recovery is recommended for the restore?</p><p>A. Snapshot</p><p>B. Directed</p><p>C. Save Set</p><p>D. Browsable</p><p>Answer: C</p><p>75.In order to license the vRealize Data protection extension for the Dell EMC NetWorker plug-in,</p><p>where must the license be applied?</p><p>A. vRealize Orchestrator host</p><p>B. vRealize Automation portal</p><p>C. VMware vCenter host</p><p>D. NetWorker License server</p><p>Answer: A</p><p>76.Which command is run on the EMC Net Worker server to recover the server's Client File Index</p><p>from available backup media?</p><p>A. nsrck -L7</p><p>B. nwrecover</p><p>C. recover -S</p><p>D. nsrls</p><p>Answer: A</p><p>77.Which applications are supported by the EMC NetWorker Module for Microsoft (NMM) federated</p><p>16 / 23</p><p>https://www.dumpsinfo.com/</p><p>backup?</p><p>A. Exchange Database Availability Group and SQL Always On Availability Group</p><p>B. SharePoint distributed farm and Windows Hyper-V CSV</p><p>C. Both full and incremental backups of Sybase and Exchange Database Availability Group</p><p>D. SharePoint distributed farm and SQL Always On Availability Group</p><p>Answer: A</p><p>78.What is the minimum number of served licenses required for a customer with 5 datazones and 2</p><p>additional storage nodes per datazone?</p><p>A. 5</p><p>B. 1</p><p>C. 7</p><p>D. 10</p><p>Answer: A</p><p>79.If an incremental backup is performed for an EMC NetWorker client, at what level is its Client File</p><p>Index (CFI) backed up?</p><p>A. 1</p><p>B. 9</p><p>C. Full</p><p>D. 4</p><p>Answer: B</p><p>80.A backup administrator has configured Data Domain Cloud Tier for long-term retention with ECS</p><p>cloud. After setting up the data movement policy in NetWorker, the administrator discovers that the</p><p>save set has not moved to their cloud even after cloning completed successfully.</p><p>What is a possible reason for this issue?</p><p>A. ECS does not support an app-based policy for cloning using NetWorker</p><p>B. Backup administrator does not have admin privileges on the Data Domain system</p><p>C. Data Domain does not have a replication license for managed-file replication</p><p>D. Data movement policy has not yet run on the Data Domain system</p><p>Answer: D</p><p>81.You create an EMC NetWorker advanced file type device. You then notice that the corresponding</p><p>read-only device is missing.</p><p>What is a possible cause?</p><p>A. Device is not labeled.</p><p>B. Device path is invalid.</p><p>C. Disk Backup Option Enabler is missing.</p><p>D. No backups have been performed.</p><p>Answer: A</p><p>82.Refer to the Exhibit.</p><p>17 / 23</p><p>https://www.dumpsinfo.com/</p><p>What is the size of the EMC NetWorker synthetic full on Wednesday?</p><p>A. 0.75 TB</p><p>B. 1.1 TB</p><p>C. 1.5 TB</p><p>D. 1.85 TB</p><p>Answer: A</p><p>83.A Dell EMC NetWorker backup administrator wants to run a clone after backing up their Microsoft</p><p>Windows clients.</p><p>Which configuration will combine the backup and clone?</p><p>A. Policy</p><p>B. Protection Group</p><p>C. Action</p><p>D. Workflow</p><p>Answer: A</p><p>84.An EMC NetWorker administrator wants to move NMC from the server where it is currently</p><p>installed to a new Windows system. The NMC reporting feature is being used.</p><p>What must be installed on the new system, in addition to the Console server software?</p><p>A. EMC NetWorker Client software and Java Runtime Environment</p><p>B. Java Runtime Environment and Change Journal Manager software</p><p>C. EMC NetWorker Client software and Change Journal Manager software</p><p>D. EMC NetWorker Storage Node software and Java Runtime Environment</p><p>Answer: A</p><p>85.Which EMC NetWorker feature specifies the maximum number of simultaneous save streams that</p><p>can be sent to a device?</p><p>A. Multistreaming</p><p>B. Target sessions</p><p>C. Max parallelism</p><p>D. Max sessions</p><p>Answer: C</p><p>86.A backup administrator has installed a new NetWorker server.</p><p>What command is used to apply the license key?</p><p>A. nsradmin</p><p>B. nsrlic</p><p>C. nsrstage</p><p>D. nsrcap</p><p>18 / 23</p><p>https://www.dumpsinfo.com/</p><p>Answer: A</p><p>87.What is a consideration when configuring an EMC NetWorker probe-based backup?</p><p>A. Probe script must be located on the NetWorker server</p><p>B. Only one probe resource can be assigned to a protection group</p><p>C. Probe script must return an Exit Code of 1 for the backup to run</p><p>D. Name of probe script must start with "nsr" or "save"</p><p>Answer: D</p><p>88. All save sets are backed up.</p><p>89.Which type of backup should be used to back up only the DB2 data that has changed since the</p><p>last full backup using Dell EMC NetWorker?</p><p>A. Cumulative Incremental</p><p>B. Incremental</p><p>C. Differential</p><p>D. Incremental Delta</p><p>Answer: B</p><p>90.In a Dell EMC NetWorker backup environment, server parallelism is set to '8'. There are eight</p><p>clients and each client has one save set. There are two devices in the backup pool and each device is</p><p>accessible to all clients. Max sessions is set to ‘2’ for both devices.</p><p>How many save sessions will be directed to each device?</p><p>A. 1</p><p>B. 2</p><p>C. 4</p><p>D. 8</p><p>Answer: C</p><p>91.A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC</p><p>Disk Library. To ensure that the embedded storage node is used to read the data during clone</p><p>operations, what is required?</p><p>A. Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.</p><p>B. Set the clone storage node value for the embedded storage node client resource to itself.</p><p>C. Create a client for the embedded storage node.</p><p>D. Create a clone pool and assign the appropriate rights to it.</p><p>Answer: A</p><p>92.Which type of Dell EMC NetWorker recovery automatically performs a point-in-time recovery?</p><p>A. Save set</p><p>B. Block based</p><p>C. Browsable</p><p>D. Directed</p><p>Answer: A</p><p>93.An EMC NetWorker administrator wants to determine the RPC port range for a host.</p><p>19 / 23</p><p>https://www.dumpsinfo.com/</p><p>Which directory contains this information?</p><p>A. nsrladb</p><p>B. catalogs</p><p>C. jobsdb</p><p>D. nsrdb</p><p>Answer: A</p><p>94.Which daemons are present on an EMC NetWorker storage node to which a tape library is</p><p>configured?</p><p>A. nsrexecd, nsrsnmd, nsrlcpd, nsrmmd</p><p>B. nsrexecd, nsrsnmd, nsrindexd, nsrlcpd</p><p>C. nsrjobd, nsrmmd, nsrlcpd, nsrindexd</p><p>D. nsrjobd, nsrmmdbd, nsrd, nsrsnmd</p><p>Answer: A</p><p>95.In an EMC NetWorker environment, what is the default retention period for information about</p><p>completed backups that is contained in the Management Console Database?</p><p>A. 3 months</p><p>B. 6 months</p><p>C. 12 months</p><p>D. 1 months</p><p>Answer: D</p><p>96.An EMC NetWorker client has a file system with two files; A and B.</p><p>As the NetWorker administrator, you have created a backup schedule for this client consisting of the</p><p>following:</p><p>- Full back up every Sunday</p><p>- Level 2 on Monday</p><p>- Level 3 on Wednesday</p><p>- Incremental on Thursday</p><p>- Level 2 on Friday</p><p>File B is changed on Monday, file C is created on Tuesday, file A is changed on Wednesday, and file</p><p>D is created on Thursday.</p><p>Which files will be backed up on Friday?</p><p>A. A, B, C, and D</p><p>B. D only</p><p>C. A and D only</p><p>D. A, C, and D only</p><p>Answer: A</p><p>97.An EMC NetWorker administrator installed the NetWorker client software on a Microsoft Windows</p><p>server that needs to be backed up. The Networker device resource is already configured. However,</p><p>the administrator is still unable to perform a backup of this client.</p><p>Which other step needs to be taken to perform a backup</p><p>successfully?</p><p>A. Create a client resource for the client to be backed up</p><p>B. Disable the VSS-service on the Windows server</p><p>C. Unlabel the backup device in NMC</p><p>D. First backup needs to be initiated manually on the client side</p><p>20 / 23</p><p>https://www.dumpsinfo.com/</p><p>Answer: A</p><p>98.What is a characteristic of a Dell EMC NetWorker online database backup?</p><p>A. Uses a vendor specific API to extract data</p><p>B. Shuts down the database before backing up the data</p><p>C. Used only in an active/passive environment</p><p>D. Copies the data to a temporary location before backup</p><p>Answer: A</p><p>99.In an EMC NetWorker environment, which factor needs to be tuned to balance the performance</p><p>between backups and restores?</p><p>A. The number of backup streams to tape</p><p>B. The number of scheduled clients started simultaneously</p><p>C. The amount of client data backed up per group</p><p>D. The number of tapes per client backup</p><p>Answer: A</p><p>100.A backup administrator wants to exclude all user temp directories during backups.</p><p>How can this be implemented using EMC NetWorker?</p><p>A. Exclude the files using a NetWorker directive</p><p>B. Create a backup_exclusion file</p><p>C. Specify each file to exclude in the client resource</p><p>D. Specify only the files to back up in the client save set attribute</p><p>Answer: B</p><p>101.Which Dell EMC NetWorker function is used to rollover NSM snapshots to backup media?</p><p>A. Staging</p><p>B. Backup</p><p>C. Cloning</p><p>D. Aging</p><p>Answer: C</p><p>102. Be able to back up Microsoft Exchange, SharePoint and Hyper-V servers.</p><p>103.What is a function of the nsrwatch program?</p><p>A. View active sessions</p><p>B. Generate online reports</p><p>C. View all NetWorker Servers</p><p>D. View device configuration changes</p><p>Answer: A</p><p>104.In a Dell EMC NetWorker environment, what does a “T” in the clone flags for the mminfo</p><p>command output indicate?</p><p>A. A save set that is on the Cloud Tier device but has not yet moved to the cloud provider</p><p>B. A save set that is on the Cloud Tier device and has already moved to the cloud provider</p><p>C. A save set that is on the CloudBoost device and has already moved to the cloud provider</p><p>21 / 23</p><p>https://www.dumpsinfo.com/</p><p>D. A save set that is on the CloudBoost device but has not yet moved to the cloud provider</p><p>Answer: A</p><p>105.A NetWorker administrator is restoring a file from a client and selects the correct browse time.</p><p>The following error message is displayed: "no backup entries backed up to server at time" Assuming</p><p>the backup of that index still exists, what can be done to locate the file?</p><p>A. run nsrck -L7 on server</p><p>B. run nsrck -L7 on client</p><p>C. run nsrim on server</p><p>D. run nsrck -t "dd/mm/yyyy" -L7 client_name on server</p><p>Answer: D</p><p>106.An EMC NetWorker administrator wants to create a new custom notification. The notification</p><p>needs to send an e-mail with an alert severity when a backup failure of a save group occurs.</p><p>Which attribute is configured to specify the alert severity?</p><p>A. Priority</p><p>B. Action</p><p>C. Alert</p><p>D. Event</p><p>Answer: A</p><p>107.Which Microsoft application is supported by EMC NetWorker Module for Microsoft using both</p><p>VSS and VDI technologies?</p><p>A. SQL Server</p><p>B. Exchange</p><p>C. SharePoint</p><p>D. Hyper-V</p><p>Answer: A</p><p>108.A Dell EMC NetWorker administrator is unable to assign a protection group to a workflow. During</p><p>the configuration, the drop-down does not list that group as a selection.</p><p>What is a possible reason for the missing group?</p><p>A. Group is already assigned</p><p>B. Group is disabled</p><p>C. Group does not contain any clients</p><p>D. Group has over 250 client resources</p><p>Answer: A</p><p>109. Minimize the performance impact on the client caused by the backup operation.</p><p>Which NetWorker module needs to be implemented?</p><p>A. EMC NetWorker Module for Microsoft with EMC hardware provider</p><p>B. EMC NetWorker Module for Databases and Applications with EMC hardware provider</p><p>C. EMC NetWorker Module for Microsoft with Microsoft VSS provider</p><p>D. EMC NetWorker Module for Databases and Applications with Microsoft VSS provider</p><p>Answer: A</p><p>22 / 23</p><p>https://www.dumpsinfo.com/</p><p>110.Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same</p><p>tape?</p><p>A. OTF</p><p>B. TAR</p><p>C. CPIO</p><p>D. ZIP</p><p>Answer: A</p><p>111. Take snapshot</p><p>112.A customer is adding new tape devices to an EMC NetWorker server. The command is issued to</p><p>scan for devices but does not find the new devices.</p><p>What is the most likely cause?</p><p>A. Devices are not initialized until jbconfig has been initiated.</p><p>B. Local device bootstrap has not been configured on the hard drive.</p><p>C. Devices have not been added at the OS level.</p><p>D. PAX translation mini-driver has not been installed.</p><p>Answer: C</p><p>Powered by TCPDF (www.tcpdf.org)</p><p>23 / 23</p><p>https://www.dumpsinfo.com/</p><p>http://www.tcpdf.org</p>