HQT-4420 Dumps - Hitachi Vantara Qualified Professional - Content Platform Installation

Text Material Preview

<p>HQT-4420</p><p>Exam Name: Hitachi Vantara Qualified Professional -</p><p>Content Platform Installation</p><p>Full version: 35 Q&As</p><p>Full version of HQT-4420 Dumps</p><p>Share some HQT-4420 exam dumps below.</p><p>1. You are performing an online upgrade of an HCP G10 and the upgrade fails.</p><p>Which log is available to assist troubleshooting?</p><p>A. Syslog</p><p>B. Rollback logs</p><p>1 / 5</p><p>https://www.certqueen.com/HQT-4420.html</p><p>C. Simple Trace log</p><p>D. Arc-deploy logs</p><p>Answer: D</p><p>Explanation:</p><p>When performing an online upgrade of an HCP G10 and the upgrade fails, the Arc-deploy logs</p><p>are the relevant logs available to assist with troubleshooting. These logs contain detailed</p><p>information about the deployment and upgrade processes, including errors or issues</p><p>encountered during the upgrade. Accessing these logs allows administrators to diagnose the</p><p>failure and take corrective actions. Hitachi Vantara Content Platform Installation</p><p>Reference: The Arc-deploy logs are essential for understanding the sequence of events and</p><p>identifying the exact step or component that caused the failure during an online upgrade of the</p><p>HCP G10.</p><p>2. You are preparing to perform an offline upgrade on an HCP G10 and the pre-upgrade check</p><p>procedure fails. The error message says that you do not have enough capacity on node 103 to</p><p>perform the upgrade.</p><p>Which service procedure should you run to resolve this problem?</p><p>A. Recover an HCP Node</p><p>B. Free Space On Nodes</p><p>C. Install a Hotfix</p><p>D. Change Region Count</p><p>Answer: B</p><p>Explanation:</p><p>If the pre-upgrade check procedure fails due to insufficient capacity on node 103 to perform the</p><p>upgrade, the service procedure to run is Free Space On Nodes. This procedure helps to identify</p><p>and clear unnecessary files or redistribute data, freeing up the required capacity on the node to</p><p>proceed with the upgrade.</p><p>Hitachi Vantara Content Platform Installation</p><p>Reference: The "Free Space On Nodes" procedure is specifically designed to manage and</p><p>optimize storage capacity across HCP nodes, ensuring that upgrades and other operations</p><p>have adequate space to execute successfully.</p><p>3. Which two statements are true about the HCP G10 SSD option? (Choose two.)</p><p>A. Two SSD disks are installed at the rear of the server</p><p>B. Six SSD disks are installed in the front of the server</p><p>C. Software RAID1 is used to mirror the disks</p><p>2 / 5</p><p>D. Hardware RAID6 is used to ensure fault tolerance.</p><p>Answer: A, C</p><p>Explanation:</p><p>For the HCP G10 SSD option:</p><p>Two SSD disks are installed at the rear of the server (A): This is correct. The SSDs in the HCP</p><p>G10 server are typically installed at the rear of the server to provide fast access to critical</p><p>system data, such as metadata and indexes.</p><p>Software RAID1 is used to mirror the disks (C): This statement is also correct. Software RAID1</p><p>provides mirroring of the SSD disks, ensuring redundancy and data protection in case of a disk</p><p>failure. RAID1 is chosen for its simplicity and reliability in providing redundancy without requiring</p><p>additional hardware. Details can be found in the "HCP G10 Hardware Configuration and</p><p>Maintenance Guide."</p><p>4. You are installing an HCP G10 and are setting up the BIOS.</p><p>What are two requirements when configuring in the BIOS? (Choose two.)</p><p>A. The BMC IP address, net mask and gateway should be set</p><p>B. Fast boot should be enabled</p><p>C. PXE should be disabled for all interfaces</p><p>D. The OS virtual disk should be selected as boot device</p><p>Answer: A, D</p><p>Explanation:</p><p>When setting up the BIOS for an HCP G10, two key requirements are:</p><p>The BMC (Baseboard Management Controller) IP address, net mask, and gateway should be</p><p>set: This configuration enables remote management and monitoring of the HCP G10 node,</p><p>allowing administrators to manage the node even when the operating system is not running.</p><p>The OS virtual disk should be selected as the boot device: This ensures that the node boots</p><p>from the correct storage device where the operating system is installed, which is essential for</p><p>the system to operate correctly.</p><p>Hitachi Vantara Content Platform Installation</p><p>Reference: Proper configuration in the BIOS is critical for managing and booting the HCP G10</p><p>node effectively, as outlined in the installation instructions.</p><p>5. How should the RAID group(s) and logical volume(s) be configured on an HCP G10 node</p><p>with six internal drives?</p><p>A. a single RAID group with a single logical volume</p><p>B. a single RAID group with three logical volumes.</p><p>3 / 5</p><p>C. three RAID groups each with a single logical volume</p><p>D. three RAID groups each with three logical volumes</p><p>Answer: A</p><p>Explanation:</p><p>On an HCP G10 node with six internal drives, the recommended configuration is to create a</p><p>single RAID group with a single logical volume. This setup maximizes the available storage</p><p>capacity and provides a balanced approach to data protection, performance, and management</p><p>simplicity. By using a single RAID group, the HCP system can efficiently manage data</p><p>redundancy and integrity across all drives.</p><p>Hitachi Vantara Content Platform Installation</p><p>Reference: Configuring a single RAID group with a single logical volume simplifies management</p><p>and provides optimal performance and redundancy, which aligns with the best practices for</p><p>setting up an HCP G10 node.</p><p>6. What is the default password for logging into the S10 or the S30 management console?</p><p>A. Chang3Me!</p><p>B. chang3me!</p><p>C. Start123l</p><p>D. Manager</p><p>Answer: A</p><p>Explanation:</p><p>The default password for logging into the S10 or the S30 management console is "Chang3Me!".</p><p>This default password is provided to ensure initial access to the management console, but it is</p><p>strongly recommended to change this password immediately upon first login to maintain system</p><p>security. Information regarding default credentials can be found in the "Hitachi Vantara HCP</p><p>S10 and S30 Management Console User Guide."</p><p>4 / 5</p><p>More Hot Exams are available.</p><p>350-401 ENCOR Exam Dumps</p><p>350-801 CLCOR Exam Dumps</p><p>200-301 CCNA Exam Dumps</p><p>Powered by TCPDF (www.tcpdf.org)</p><p>5 / 5</p><p>https://www.certqueen.com/promotion.asp</p><p>https://www.certqueen.com/350-401.html</p><p>https://www.certqueen.com/350-801.html</p><p>https://www.certqueen.com/200-301.html</p><p>http://www.tcpdf.org</p>