D-RP-OE-A-24 Dell RecoverPoint Operate Achievement Dumps Questions

Text Material Preview

D-RP-OE-A-24 Dell RecoverPoint Operate Achievement exam dumps questions
are the best material for you to test all the related DELL EMC exam topics. By
using the D-RP-OE-A-24 exam dumps questions and practicing your skills, you
can increase your confidence and chances of passing the D-RP-OE-A-24 exam.
Features of Dumpsinfo’s products
Instant Download
Free Update in 3 Months
Money back guarantee
PDF and Software
24/7 Customer Support
Besides, Dumpsinfo also provides unlimited access. You can get all
Dumpsinfo files at lowest price.
Dell RecoverPoint Operate Achievement D-RP-OE-A-24 exam free dumps
questions are available below for you to study. 
Full version: D-RP-OE-A-24 Exam Dumps Questions
1.A RecoverPoint administrator wants to use the compression setting to save bandwidth in their
environment.
What will be the impact of changing the link compression setting on a Consistency Group?
A. Short initialization
B. Temporary high-load
C. Journal history will be lost
D. Long resynchronization
Answer: B
Explanation:
Changing the link compression setting on a RecoverPoint Consistency Group can result in a
temporary high-load on the system. This is because when compression is enabled or settings are
changed, the system needs to compress the existing data before it can be transmitted, which requires
additional processing power and can temporarily increase the load on the RecoverPoint Appliances
 1 / 6
https://www.dumpsinfo.com/unlimited-access/
https://www.dumpsinfo.com/exam/d-rp-oe-a-24
(RPAs).
The process involves:
The administrator changes the link compression setting in the Consistency Group configuration.
The RPAs begin compressing the data that needs to be replicated across the network.
This compression process increases the CPU and memory usage on the RPAs, leading to a
temporary high-load situation.
Once the initial compression is completed, the system load returns to normal levels, and replication
continues with the new compression setting in effect.
It’s important to note that while the system is under high-load, there might be a temporary impact on
performance, but this does not affect the integrity of the replication or the Journal history. The system
is designed to handle such temporary increases in load without losing any critical data1.
2. The production host writes data to the production volumes, but is first intercepted by the splitter.
The splitter sends the write data to the RPA.
3.What is a possible option to store the "Collect System Information" file using RecoverPoint
Unisphere?
A. Local RPA
B. Syslog server
C. External temporary FTP server
D. FTP server configured on the RPA cluster
Answer: D
Explanation:
When using RecoverPoint Unisphere to collect system information, the “Collect System Information”
file can be stored on an FTP server that is configured on the RPA cluster. This allows for centralized
storage and easy access to the file for further analysis or troubleshooting.
The steps typically involve:
Accessing Unisphere: Log into the RecoverPoint Unisphere interface.
Running the Wizard: Navigate to the appropriate section and run the “Collect System Information”
wizard.
Choosing Storage Option: Select the option to store the file on an FTP server configured on the RPA
cluster.
Retrieving the File: Access the FTP server to retrieve the “Collect System Information” file as
needed.
This method ensures that the collected system information is securely stored and can be accessed by
authorized personnel for maintenance or support purposes1.
4.A storage administrator has seen high-load events in their RecoverPoint environment. The
administrator wants to review the performance data for the past week with RecoverPoint. In addition,
the administrator wants the raw data saved to a spreadsheet to review and create graphs of system
performance over a period of time.
Which CLI command should be used?
A. export_statistics
B. balance_load
C. get_rpa_statistics
D. detect_bottlenecks
Answer: A
Explanation:
To review the performance data for the past week in a RecoverPoint environment and save the raw
data for further analysis, the export_statistics CLI command should be used. This command allows
 2 / 6
https://www.dumpsinfo.com/
the administrator to export the performance statistics data, which can then be saved to a spreadsheet
and used to create graphs or conduct detailed analysis of system performance over time.
The steps to use this command are:
Access the CLI: Log into the RecoverPoint CLI using the appropriate credentials.
Execute the Command: Run the export_statistics command to gather the performance data.
Save the Data: The command will generate the performance data, which can be saved to a file.
Analyze the Data: Open the saved file in a spreadsheet application to review the data and create
graphs as needed.
This command is particularly useful for administrators who need to monitor and analyze the
performance of their RecoverPoint environment over a specific period1.
5.If a VPLEX distributed device is selected during the RecoverPoint Consistency Group Creation
wizard, which option will appear?
A. Section to define production and replica Journals on unregistered storage arrays
B. Radio button to select which cluster will be the winning cluster upon the initialization of the
Consistency Group
C. List of LUNs which are less than 10 TBs in size; the size limit for distributed devices
D. Ability to create a MetroPoint Consistency Group
Answer: D
Explanation:
When a VPLEX distributed device is selected during the RecoverPoint Consistency Group Creation
wizard, the option to create a MetroPoint Consistency Group becomes available. This is because
MetroPoint is a feature that leverages VPLEX distributed devices for enhanced data protection and
disaster recovery capabilities.
The steps involved in this process typically include:
Selecting the VPLEX distributed device: During the creation of a Consistency Group, you choose the
VPLEX distributed device as the source of replication.
MetroPoint option appears: Once a VPLEX distributed device is selected, the wizard presents the
option to create a MetroPoint Consistency Group.
Configuring the MetroPoint Consistency Group: If you choose to create a MetroPoint Consistency
Group, you will then configure the necessary settings, such as replication mode and RPO (Recovery
Point Objective).
Finalizing the setup: After configuring the settings, you finalize the creation of the Consistency Group,
which now has the enhanced capabilities provided by the MetroPoint feature1.
MetroPoint Consistency Groups are designed to provide continuous data protection and availability
across multiple sites, combining the benefits of VPLEX Metro with the third-site replication provided
by RecoverPoint1.
6.When attempting to protect new XtremlO LUNs, the administrator is unable to add an XtremIO
source LUN to the Consistency Group.
What is a possible reason for this issue?
A. XtremlO array was not licensed in RecoverPoint
B. RecoverPoint/EX only allows the protection of VNX arrays
C. XtremlO arrays are only protected with RecoverPoint for VMs
D. XtremIO LUN was created with a 512-byte block size
Answer: A
Explanation:
One possible reason for the inability to add an XtremIO source LUN to the Consistency Group in
RecoverPoint could be that the XtremIO array was not licensed in RecoverPoint. Licensing is a critical
step in enabling the features and functionalities of RecoverPoint for specific storage arrays. If the
 3 / 6
https://www.dumpsinfo.com/
XtremIO array is not licensed, RecoverPoint would not recognize or allow the addition of its LUNs to a
Consistency Group1.
Additionally, it’s important to ensure that the RecoverPoint version supports the XtremIO array
model. For instance, RecoverPoint does not support XtremIO X2 arrays until version 5.11. Therefore,
if the RecoverPoint version is earlier than 5.1, it would not be able to replicate volumes from an
XtremIOX2 array, which could manifest as an issue when trying to add LUNs to a Consistency
Group.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell
RecoverPoint documentation or contact Dell EMC support directly.
7.1.What is the recommended wait period before running the Balance Load tool?
A. 4 Days
B. 5 Days
C. 7 Days
D. 6 Days
Answer: C
Explanation:
The Dell RecoverPoint documentation recommends a wait period of 7 days before running the
Balance Load tool. This period allows for the system to stabilize and for any anomalies in the load
distribution to become apparent, ensuring that the Balance Load tool can operate effectively. It’s
important to note that this information is based on the best practices outlined in the Dell RecoverPoint
documentation and may be subject to change with different versions or specific system
configurations. For the most accurate and up-to-date information, it is always best to consult the latest
official Dell RecoverPoint documentation or contact Dell EMC support directly1.
8. The splitter then writes the data to the production storage volume.
9.What is the minimum size of a Journal when using Distributed Consistency Groups?
A. 80 GB
B. 40 GB
C. 10 GB
D. 20 GB
Answer: B
Explanation:
For Distributed Consistency Groups in a Dell RecoverPoint environment, the minimum size required
for each journal volume is 40 GB. This is the minimum per copy, which can be a single LUN or
multiple LUNs that add up to at least 40 GB1.
The size of the journal is determined by the write change rate of what is being replicated and the
protection window required per Consistency Group. A general rule of thumb is about 15-20% of the
total amount of data being replicated. For example, if a Distributed Consistency Group (DCG) has
production server LUNs totaling 500 GB, then the journal per copy would be about 100 GB following
this rule1.
It’s important to note that while 40 GB is the minimum, the actual size may need to be larger
depending on the specific requirements and write change rate of the environment. The journal size
should be sufficient to handle the data changes and provide the necessary protection window1.
10.A storage administrator has one production site and one remote site. The administrator configured
the RecoverPoint with VNX(SE) cluster at both sites. The current environment has two Consistency
Groups configured with two copies each; one production copy and one remote copy. Based on the
 4 / 6
https://www.dumpsinfo.com/
company's growing business requirements, the administrator has been asked to keep a local copy of
the production data.
Which action should occur in order to meet this requirement?
A. RecoverPoint with VNX(SE) does not support more than two copies in a single Consistency Group
B. Delete and reconfigure the existing Consistency Group for a local and remote replication
C. Add a copy into the existing Consistency Group for a local replication
D. Upgrade the RecoverPoint with VNX(SE) license to RecoverPoint/EX and then reconfigure the
Consistency Group
Answer: C
Explanation:
To meet the requirement of keeping a local copy of the production data in a RecoverPoint
environment with VNX(SE) clusters, the administrator can add a local copy into the existing
Consistency Group.
This action does not require deleting and reconfiguring the existing Consistency Group or upgrading
the license. Here are the steps:
Access Unisphere for RecoverPoint: Log into the Unisphere interface for RecoverPoint management.
Navigate to the Consistency Group: Find the Consistency Group that needs the local copy.
Add a Local Copy: Use the option to add a copy into the selected Consistency Group.
Configure the Local Copy: Specify the settings for the local copy, such as the Journal volume and
RPO settings.
Apply Changes: Save the changes to implement the local replication.
This process allows the administrator to enhance the data protection strategy by adding a local copy
for operational recovery or other business needs without disrupting the existing remote replication
setup1.
11.A storage administrator is unable to perform Direct Access to a copy in their RecoverPoint
environment.
Which array type has this limitation with regards to RecoverPoint copies?
A. VMAX
B. VNX
C. XtremIO
D. VPLEX
Answer: C
Explanation:
In a Dell RecoverPoint environment, Direct Access mode allows for write access to a replica volume
during testing or other scenarios. However, when using XtremIO arrays, Direct Access mode is not
available because XtremIO handles replication differently compared to other array types. Instead,
XtremIO uses its snapshot technology, which does not support Direct Access in the same way as
traditional replication methods1.
Here’s why Direct Access is limited with XtremIO:
XtremIO Snapshot Technology: XtremIO arrays use snapshot technology for replication, which is
different from the replication methods used by other array types like VMAX, VNX, or VPLEX.
Direct Access Mode: This mode typically allows a replica volume to be mounted and written to
directly, but due to the way XtremIO handles snapshots, this functionality is not supported.
RecoverPoint Integration: RecoverPoint integrates with XtremIO to provide replication and disaster
recovery solutions, but the Direct Access feature is not compatible with XtremIO’s snapshot-based
replication1.
Therefore, when using XtremIO arrays in a RecoverPoint environment, administrators need to be
aware of this limitation and plan their disaster recovery and testing strategies accordingly1.
 5 / 6
https://www.dumpsinfo.com/
Powered by TCPDF (www.tcpdf.org)
 6 / 6
https://www.dumpsinfo.com/
http://www.tcpdf.org