VMware Certification 5V0-22 23 Exam Training Questions

Text Material Preview

5V0-22.23 VMware vSAN Specialist v2 exam dumps questions are the best
material for you to test all the related VMware exam topics. By using the
5V0-22.23 exam dumps questions and practicing your skills, you can increase
your confidence and chances of passing the 5V0-22.23 exam.
Features of Dumpsinfo’s products
Instant Download
Free Update in 3 Months
Money back guarantee
PDF and Software
24/7 Customer Support
Besides, Dumpsinfo also provides unlimited access. You can get all
Dumpsinfo files at lowest price.
VMware vSAN Specialist v2 5V0-22.23 exam free dumps questions are
available below for you to study. 
Full version: 5V0-22.23 Exam Dumps Questions
1. Using vSAN Data Persistence Platform with Modern Stateful Services https://docs.vmware.com/en/
VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-
F7223607-30A5-4B2D-9B06-A55A65FEAA11.html
2.A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive
until the next morning. The administrator needs to ensure the availability of the production workload at
all times.
Which step should be taken by the administrator to meet this goal?
A. Shut down the production VMs.
B. Perform a live vMotion to another host.
C. Disable the vSAN Service on the VMkernel port.
D. Enter Maintenance Mode with 'Full Data Migration'
 1 / 8
https://www.dumpsinfo.com/unlimited-access/
https://www.dumpsinfo.com/exam/5v0-22-23
Answer: D
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/6.7/vsan-673-monitoring-troubleshooting-
guide.pdf
3.A new vSAN Cluster with four hosts has to be designed for a single site architecture.
Which design decision is correct?
A. All the data must remain accessible even with two host failures.
B. Configure the storage controllers to use RAID.
C. Use block-based storage for the newvSAN cluster.
D. Only hardware listed on the VMware Compatibility Guide will be deployed.
Answer: D
Explanation:
Reference: https://www.parallels.com/blogs/ras/vmware-vsan/
4.A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in
a vSAN cluster.
Which action is necessary to achieve this level of encryption?
A. Enable vSAN Cluster level encryption via Storage Policy. No KMS is required.
B. Enable vSAN Data In-Transit encryption at the cluster level. No KMS is required.
C. Deploy KMS server, and enable vSAN Data at Rest encryption at the cluster level.
D. Deploy KMS server, and enable vSAN Data at Rest and In-Transit encryption at the host level.
Answer: B
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan.doc/GUID-1
0099331-92E7-41AF-BCAA-88DB4B4A4B7B.html
5.An administrator is responsible for managing a 5-node vSAN 7.0 cluster that hosts 150 virtual
machines.
Each virtual machine belongs to one of the following vSAN Storage Policies:
? vSANPolicy1:
? Site Disaster Tolerance: None
? Failures to Tolerate: 1 failure - RAIN5 (Erase Coding)
vSANPolicy2:
? Site Disaster Tolerance: None
? Failures to Tolerate: No data redundancy
Following an unplanned power event within the datacenter, the administrator has been alerted to the
fact that one host has permanently failed. Prior to the vSAN host failure, the usable storage capacity
of the vSAN Cluster was more than 40%.
What will be the potential impact to any virtual machine that was running on the failed host using
vSANPolicy2?
A. vSAN will immediately start the recovery process.
B. Each virtual machine will be restarted on another vSAN host using vSphere HA.
C. After 60 minutes, vSAN will automatically start the recovery process.
D. Each virtual machine will need to be restored from backup.
Answer: D
6.vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one
 2 / 8
https://www.dumpsinfo.com/
storage policy, but the administrator did not explicitly assign a storage policy when provisioning the
new VM.
What is the result of this situation?
A. The VM provisioning will fail.
B. The vSphere Web Client will choose the last vSAN Storage Policy used.
C. The VM objects will be protected based on the vSAN Default Storage Policy configurations.
D. No data protection will be applied to the VM objects.
Answer: C
Explanation:
When a virtual machine is deployed on a vSAN datastore, it must be assigned at least one storage
policy. If the administrator did not explicitly assign a storage policy when provisioning the new VM,
vSAN will apply the vSAN Default Storage Policy to the virtual machine. The vSAN Default Storage
Policy is a pre-configured storage policy that is automatically applied to virtual machines when no
other storage policy is assigned.
According to VMware's official guide, "If a storage policy is not explicitly assigned to a virtual machine
when it is provisioned, the virtual machine objects will be protected based on the vSAN Default
Storage Policy configurations." This means that the vSAN Default Storage Policy will apply to the VM
objects even if the administrator did not explicitly assign a storage policy when provisioning the new
VM.
7.A financial institute deployed a vSAN Stretched Cluster to provide geographical resiliency. After a
recent WAN outage, the institute decided to deploy a smaller warm site and use vSphere Replication
to asynchronously replicate the data.
The environment has the following configurations:
• 1300 VMs
• 300 TBs of storage
• RAID-5 vSAN storage policy
What is the minimum amount of vSphere Replication servers required to support the requirement?
A. 1
B. 3
C. 10
D. 7
Answer: A
Explanation:
The correct answer is A. 1. vSphere Replication servers are not required for vSAN stretched cluster
deployments, as the data is automatically replicated between the primary and secondary sites.
Therefore, the minimum amount of vSphere Replication servers required to support the requirement
is 1.
Reference: https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.avail.doc/GUID-
F7A33F01-2A05-4D6C-A7F0-353A9F8E75CF.html
8.An administrator has discovered that space utilized by VMs does not decrease after deleting files
and folders within the VMs. The administrator needs to be able to reclaim this space.
Which action could the administrator take to accomplish this task?
A. Disable Storage I/O Control for the vSAN cluster.
B. Reboot the VM to recreate the swap file.
C. Set the Object Space Reservation rule to 100%.
D. Enable TRIM/UN MAP for the vSAN cluster.
Answer: D
Explanation:
 3 / 8
https://www.dumpsinfo.com/
Reference:
https://blogs.vmware.com/virtualblocks/2018/09/10/vmware-vsan-6-7u1-storage-reclamation-trim-
unmap/
https://docs.vmware.com/en/VMware-Horizon/2206/virtual-desktops/GUID-
A1BBB09F-4E42-4FE7-9B6D-CA62615BC9C5.html
9. Performance Troubleshooting - Understanding the Different Levels ...
https://blogs.vmware.com/virtualblocks/2019/06/12/vsan-performance-metric-levels/
vSAN Operations Guide | VMware https://core.vmware.com/resource/vsan-operations-guide
Administering VMware vSAN - VMware vSphere 7.0 https://docs.vmware.com/en/VMware-
vSphere/7.0/vsan-703-administration-guide.pdf
10. Saved the configuration
After saving the configuration, all hosts in the cluster are out of compliance.
Which step is needed next to accomplish this task?
A. Remediate all nodes in the cluster.
B. Roll back the vLCM configuration to the latest compliant image.
C. Place all hosts in maintenance mode.
D. Stage the upgrade images.
Answer: B
Explanation:
Roll back the vLCM configuration to the latest compliant image. After saving the configuration, all
hosts in the cluster are out of compliance, so the next step is to roll back the vLCM configuration to
the latest compliant image. This can be done by selecting the “Roll Back” option from the vLCM
image selection menu.
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.upgrade.doc/GUI
D-B2F7B3A3-BD7F-4A4F-A77C-90F4B7EAC54F.html
11.A vSAN administrator hasdeployed a new All-Flash vSAN cluster and would like to perform a
health test on it to verify that the network performance is meeting the network throughput
requirements.
Which tool should be used for this purpose?
A. vSAN Cluster Performance
B. vSAN Proactive Test
C. vSAN Skyline
D. lOlnsight
Answer: B
Explanation:
According to the VMware vSAN documentation [1], the vSAN Proactive Test is a built-in feature of
vSAN that can be used to test the health of a vSAN cluster and verify that the network performance
meets the throughput requirements. This tool can be accessed through the vSAN Health Service. [1] 
https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-esxi-vcenter-server-70-vsan-health-
service-guide.pdf
12.A vSAN administrator is investigating vSAN performance related problems but cannot find any
vSAN performance statistics on the cluster summary page.
Why is this situation occurring?
A. The administrator has read-only permissions on the cluster level.
 4 / 8
https://www.dumpsinfo.com/
B. vSAN Performance service is not enabled.
C. The vRealize Operations Manager is not integrated with vSAN cluster.
D. vSAN statistics are only available via CLI.
Answer: B
Explanation:
vSAN performance statistics are not available on the cluster summary page if the vSAN Performance
service is not enabled. This service is responsible for collecting and displaying performance data for
vSAN components such as disk groups, virtual machines and virtual disks. Without this service
enabled, vSAN performance statistics will not be available on the vSphere Web Client, and the
administrator will not be able to monitor the performance of the vSAN cluster.
To enable vSAN Performance service, the vSAN administrator can go to the vSphere Web Client,
navigate to the vSAN cluster, click on the Configure tab, and then click on Services. Locate the vSAN
Performance service, and click on the Start button.
This is explained in VMware vSAN documentation in the section "Monitoring vSAN Performance"
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-admin-
guide/GUID-7E8F6C98-7C0B-4D21-8F1A-F3A3A9F4F4A4.html
13.An Application Clustering Solution requires an in-guest attachable LUN which can be shared
across two different VMs.
Which vSAN feature can meet this requirement?
A. vSAN Data Persistence
B. vSAN iSCSI Target Service
C. vSAN HCI Mesh
D. vSAN Datastore Sharing
Answer: B
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsan-703-administration-guide.pdf
14.An administrator enabled vSAN and then enabled vSphere HA on the same cluster. Over which
network will vSphere HA traverse?
A. Both vSAN and management network
B. Provisioning network
C. Default management network
D. vSAN network
Answer: C
Explanation:
vSphere HA will traverse the management network (C). According to the VMware Official Guide, “If
vSAN and vSphere HA are enabled in the same cluster, vSphere HA will traverse the default
management network.”
15.When attempting to add a directly attached disk device to a host disk group, the intended disk
does not show among the available devices in disk management.
Which action should be taken?
A. Delete all device partitions
B. Create a 1GB metadata partition
C. Format the existing partition
D. Create a VMFS partition
Answer: A
Explanation:
 5 / 8
https://www.dumpsinfo.com/
Reference: https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/G
UID-90CCB01E-DE9C-47DA-9FEF-8B3F107FEA2C.html#GUID-90CCB01E-
DE9C-47DA-9FEF-8B3F107FEA2C
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-5D2178
B1-FC80-47FE-A0B2-392D5D10BD33.html
16.What is the maximum time range that can be stored by the vSAN health check history?
A. 30 days
B. 60 days
C. 180 days
D. 7 days
Answer: C
Explanation:
The maximum time range that can be stored by the vSAN health check history is 180 days (C).
According to the VMware Official Guide, “The vSAN Health Check history is stored for up to 180 days
before it is automatically purged.”
17.A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to
manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to
the vLCM image.
A 10GB NIC on the servers is experiencing issues, the vSAN administrator determines a new network
driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to
the driver provided by the most recent Vendor Addon.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the
NIC before remediation?
A. Add an individual component to the vLCM image that has the updated NIC driver.
B. Since server vendors release periodic server Vendor Addon updates, make sure the vLCM image
is configured to use the most recent version of the vendor addon.
C. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the
required NIC driver.
D. Remove the Vendor Addon from the vLCM image, and then manually install the network driver on
the servers.
Answer: A
Explanation:
Reference: https://infohub.delltechnologies.com/p/how-does-vsphere-lcm-compare-with-vxrail-lcm/
18.A vSAN administrator is troubleshooting poor performance of vSAN cluster while vCenter is not
available. The vSAN administrator decides to use a command line tool to monitor real-time vSAN
IOPS, throughput, and other metrics on ESXi host.
Which command line tool should be used?
A. vimtop
B. esxcli
C. esxcfg
D. vsantop
Answer: D
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/6.7/vsan-673-monitoring-troubleshooting-
guide.pdf (36)
 6 / 8
https://www.dumpsinfo.com/
19.The administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that
any virtual machines that are created are placed in the appropriate site.
Which two steps are needed to complete this task? (Choose two.)
A. Put the VMs in a vSphere DRS group.
B. Create a storage policy that includes site affinity rules and apply to VMs.
C. Create a single VM/Host group across both sites.
D. Create VM/Host groups for the two sites.
E. Put the VMs in the correct VM group.
Answer: B,D
Explanation:
When deploying a vSAN Stretched Cluster, site affinity rules can be used to ensure that virtual
machines are placed in the appropriate site. To do this, the following steps are required:
? Create a storage policy that includes site affinity rules: This can be done by creating a new storage
policy and configuring the "site placement" rules for each site. For example, you can configure a rule
that all virtual machines must reside in site A.
? Apply the storage policy to VMs: Once the storage policy is created, it needs to be applied to the
virtual machines that need to be placed in the appropriate site.
Additionally, to ensure that virtual machines are placed in the correct site, it is also necessary to
create VM/Host groups for the two sites. These groups can be used to separate the virtual machines
and hosts in the different sites, and the storage policy can be applied to the appropriate group.
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-admin-
guide/GUID-5B5D5C5B-B9A5-4A7F-8A9A-7F1B1E5B12C8.html
20.A host in a vSAN cluster has the following VMware Compatibility Guide approved disks:
• 3 Solid State Drive (SSD) used for cache
• 12 magnetic Hard Disk Drives (HDD) used for capacity
Which two options are valid disk group configurations? (Choose two.)
A. 1 Disk Group with 2 SSD and 6 HDD
B. 1 Disk Group with 3 SSD and 12 HDD
C. 4 Disk Groups with 3 HDD each
D. 2 Disk Groups with 1 SSD and 6 HDD each
E. 3 Disk Groups with 1 SSD and 4 HDD each
Answer: D,E
Explanation:
A disk group requires the following: • One flash device for caching • One to seven capacity devices
for storage A host can include a maximum of five disk groups.
21.A newly deployed vSAN cluster runsvSAN 7.0, and the vSAN cluster needs an integration with a
third-party software solution. The software solution provides full app-level redundancy, and it runs on
the vSAN Data Persistence platform.
The administrator configures vSAN Direct Configuration to integrate the third-party storage with vSAN
and now needs to configure a storage policy to make sure the vSAN Direct storage is used by the
vSAN Data Persistence platform third-party software solution.
Which type of storage policy configuration should the administrator use?
A. A storage policy with tag or capability-based rules for vSAN Direct
B. A storage policy with capability-based rules for third-party storage
C. A vSAN shared nothing policy with no data redundancy (FTT=0)
D. AvSAN storage policy with one failure to tolerate (N 1=1)
Answer: A
 7 / 8
https://www.dumpsinfo.com/
22.Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?
A. Ensure accessibility.
B. No data migration.
C. Full data migration.
D. There is no default option. The administrator must select an option.
Answer: A
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/G
UID-521EA4BC-E411-47D4-899A-5E0264469866.html#:~:text=Right%2Dclick the host
and,evacuation mode and click OK.&text=This is the default option,on this ho st remain accessible
23.The DevOps team of an organization wants to deploy their new cloud native application with
persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the
vSAN cluster and leverage the vSAN Direct feature.
Which two requirements must the administrator meet to complete this task? (Choose two.)
A. Unclaimed disks in the hosts for vSAN Direct
B. A dedicated network for vSAN Direct
C. A valid vSAN license for the vSAN cluster
D. An integration with vSAN File Services
E. vSphere HA enabled on the vSAN cluster
Answer: A,C
Explanation:
Reference: https://core.vmware.com/blog/understanding-vsan-data-persistence-platform
24.An administrator has deployed a dedicated VMware vSAN 7.0 U1 cluster that will be used to
provide developers with access to an environment that is running VMware with Tanzu workloads only.
Which vSAN feature should be configured for vSAN Data Persistence platform (vDPp)?
A. vSAN Cloud Native Storage
B. vSAN with Shared Nothing Architecture (SNA)
C. vSAN Direct
D. vSAN File Services
Answer: B
Explanation:
According to the VMware official documentation, vSAN with SNA is the recommended configuration
for the vSAN Data Persistence platform (vDPp). This configuration provides support for high
availability [1], scalability, and enterprise-grade security. With SNA, the entire vSAN cluster is
connected over a single high-speed network, and each node has direct access to the shared storage.
This ensures that workloads are balanced across the cluster, which in turn improves performance and
reliability. Additionally, SNA ensures that storage is accessible to all nodes in the cluster, eliminating
the need for any centralized storage controllers.
Powered by TCPDF (www.tcpdf.org)
 8 / 8
https://www.dumpsinfo.com/
http://www.tcpdf.org